Calvin and Hobbs Meter
Well-Known Member
Well for what it's worth, I deal with air carriers all the time who file with RNAV equipment suffixes, and then say "unable" to an RNAV or GPS approach. I'm not sure exactly what's going on there, but it's nice for them to be able to accept direct clearances without interrogation by the controller.
We are and file /Q, all-though the FMS we use (Honeywell GNS-XLS) is only RNAV 2 certified per AC 90-100A, and the "AC 90-100A compliance list" (which lists the various types of GPS equipment and what they are allowed to do). Because of this, we can not accept any RNAV SIDS or STARS, though we can legally accept en-route clearances. Either way we are still /Q.
What gets us, is even if we explain this to a controller (clearance, center, approach) the explanation/message has no way of getting to the next controller down the line, and we are constantly having to deny every controller who tries to give us RNAV terminal arrivals as we go down the line. In the past, we have explained this to one controller, been told "ok we will keep the clearance you have on file," get handed off and immediately told by the next controller to get ready for new clearance instructions to fly the RNAV STAR.
Is there anything we can do to make the message more clear in the remarks section? It's a pain in the butt, and hogs up the airwaves way more then it needs to. Needless to say, we would love a different piece of equipment rather than our current GNS-XLS (such as a Universal).
We put "NO RNAV SID/STARS!!!" in our remarks; we thought we were really pushing it when we started putting the "!!!!" at the end. What I have come to learn lately is that controllers are relying on (using) RNAV SID/STAR's much more than before, and even some airports only have RNAV departures / arrival procedures. It makes for an interesting day to say the least.