Me too, in Haines. Although as I recall it I was hitting the aileron stop.I've run out of rudder. @ppragman ...
Me too, in Haines. Although as I recall it I was hitting the aileron stop.I've run out of rudder. @ppragman ...
Crab on final. If you can keep the long axis of the airplane aligned with the runway and the direction of flight, you'll be fine. If in a jet, release the crab and kick the rudder as you put your wheels down. If in an airplane in which you can land in the crab, land in the crab. "Look, Ma. No math!"How are you guys calculating the crosswinds at your airline?
Considering you have a set max crosswind limit how do you accurately determine the crosswind?
Not even...
30 degrees is .5
45 degrees is .7
60 degrees is .9
Worried about tailwind components? Works the same (past 90 degrees):
120 degrees is .5
135 degrees is .7
150 degrees is .9
Just remember 5/7/9
Not exact, but close enough for a WAG.
Richman
highly skilled and experienced engineering test pilot who knows how to extract the maximum performance from the airplane, whereas half of the airline pilots out there graduated in the bottom half of their class.
Sigh...I wear a digital watch.I look at my watch...if it is 15 degrees off the runway the xwind is 1/4 or 25% of the velocity, at 30 degrees off it is 1/2 or 50%, at 45 degrees 3/4 or 75% and 60 is the 1/1 of the velocity. If you look at the watch it is the same 15 is 1/4 of the way around the face, 30 is 1/2, 45 is 3/4, and 60 is the whole way around.
That said, in my current jet we just touchdown in a crab.
This is the best technique I've used.Not even...
30 degrees is .5
45 degrees is .7
60 degrees is .9
Worried about tailwind components? Works the same (past 90 degrees):
120 degrees is .5
135 degrees is .7
150 degrees is .9
Just remember 5/7/9
Not exact, but close enough for a WAG.
Richman
Sigh....
This is why I get frustrated when pilot brag about how little math they know how to do. To be honest, because of this sort of thing, trigonometry was by far the most useful class I took in college in relation to being a pilot for a living. If you were going to take and care about one and only one math class as a pilot - care about trig. It has so many relatively "day to day" applications I don't even know where to begin. The rules of thumb are great (about the only one I ever cared to think about was the 5/7/9 rule as someone mentioned above) and the rules for figuring out a 3° glide slope, but there are quite a few ways that you can use trig in the flight planning process, or even in route - in fact I've done it.
For instance - you're sitting up at FLXXX headed to your destination bored out of your gourd, the GOM/FOM/WOM (whatever OM) says that pilots shall not attempt to land with greater than what's published in the manual, which, let's say is 30KTS. The wind has been steady directionally 50°, but gusting up and down all evening. How do you know you're going to be legal to even try it? Reaching back to high school we remember:
sin Theta = Opposite / Hypotenuse. Well, we know the Theta (that's your angle), the sine of theta - or sin(θ) if you're mathematically inclined - is equal to the ratio of the opposite end of the triangle you've drawn and the hypotenuse. Someone has drawn a really awesome picture of this.
![]()
Since you know that the hypotenuse is the wind pointing at you, the "adjacent angle" is going to be your groundspeed, the crosswind component is the "opposite angle." So let's set up the problem:
sin(angle_between_runway_and_wind) = crosswind_component / wind_speed
Recall that we already knew what the max crosswind component we could tolerate was and the wind speed so:
sin(50°) = 30 Knots / wind_speed
So we do some algebra:
sin(50°) = 30kts / wind_speed ----> wind_speed * sin(50°) = 30kts -----> wind_speed = 30kts / sin(50°)
Sweet! You grab your smart phone and plug these numbers into the calculator, "Okay, sine 50 is -.2623...! That can't be right!" You're correct, it isn't right, you need to be using degrees and the calculator is in radians- which if you had taken trig you'd know why, but suffice it to say that you can still use your smartphone's calculator, just make sure it's in degrees and not radians. The one on my iPhone says "rad" over in the left side when it's in radians. YMMY. Anyhow, 30kts / sin(50°) is 39.16kts, or 39kts. If the gusts are above 39 knots, land somewhere else or whatever, be a hero, but if you ball it up know that this is the way the NTSB will figure out what your crosswind component was.
That whole chart above covers other things too. Ever wonder why a 3° glide slope is about 300' / nm? That's why. Ever wonder how VNAV descent profiles get calculated? That's how (among a few other ways) it's done. Trig is insanely useful to know.
Hey, that's how I do it.When guys break out the iPad app with wind and runway heading:
![]()
Hey, that's how I do it.
I flew was a guy who said;
"Son, you'll run out of guts before you run out of rudder."
In 44 years of flying I've yet to run out of rudder.
Absolutely. For me it was in a Cherokee Six. The winds would howl in Skagway, AK.
I've maybe, once almost run out of rudder in my Stinson. Nothing sticks out. However, I'm not at a point where I need to "get out there and fly!"
Sigh....
This is why I get frustrated when pilot brag about how little math they know how to do. To be honest, because of this sort of thing, trigonometry was by far the most useful class I took in college in relation to being a pilot for a living. If you were going to take and care about one and only one math class as a pilot - care about trig. It has so many relatively "day to day" applications I don't even know where to begin. The rules of thumb are great (about the only one I ever cared to think about was the 5/7/9 rule as someone mentioned above) and the rules for figuring out a 3° glide slope, but there are quite a few ways that you can use trig in the flight planning process, or even in route - in fact I've done it.
For instance - you're sitting up at FLXXX headed to your destination bored out of your gourd, the GOM/FOM/WOM (whatever OM) says that pilots shall not attempt to land with greater than what's published in the manual, which, let's say is 30KTS. The wind has been steady directionally 50°, but gusting up and down all evening. How do you know you're going to be legal to even try it? Reaching back to high school we remember:
sin Theta = Opposite / Hypotenuse. Well, we know the Theta (that's your angle), the sine of theta - or sin(θ) if you're mathematically inclined - is equal to the ratio of the opposite end of the triangle you've drawn and the hypotenuse. Someone has drawn a really awesome picture of this.
![]()
Since you know that the hypotenuse is the wind pointing at you, the "adjacent angle" is going to be your groundspeed, the crosswind component is the "opposite angle." So let's set up the problem:
sin(angle_between_runway_and_wind) = crosswind_component / wind_speed
Recall that we already knew what the max crosswind component we could tolerate was and the wind speed so:
sin(50°) = 30 Knots / wind_speed
So we do some algebra:
sin(50°) = 30kts / wind_speed ----> wind_speed * sin(50°) = 30kts -----> wind_speed = 30kts / sin(50°)
Sweet! You grab your smart phone and plug these numbers into the calculator, "Okay, sine 50 is -.2623...! That can't be right!" You're correct, it isn't right, you need to be using degrees and the calculator is in radians- which if you had taken trig you'd know why, but suffice it to say that you can still use your smartphone's calculator, just make sure it's in degrees and not radians. The one on my iPhone says "rad" over in the left side when it's in radians. YMMY. Anyhow, 30kts / sin(50°) is 39.16kts, or 39kts. If the gusts are above 39 knots, land somewhere else or whatever, be a hero, but if you ball it up know that this is the way the NTSB will figure out what your crosswind component was.
That whole chart above covers other things too. Ever wonder why a 3° glide slope is about 300' / nm? That's why. Ever wonder how VNAV descent profiles get calculated? That's how (among a few other ways) it's done. Trig is insanely useful to know.