I hate grounding airplanes!!!!

Those DA42s were grounded almost 24/7 just before we got rid of them. When we first got them and they were new, they were awesome...which is when I got my Commercial Multi done. Then after that it all went downhill.

Seminoles aren't too much better...but they're better. Except for the 1 that keeps having oil pressure problems in the left engine.

The Arrows just suck...

And the 172s, well there are 41 of them so you just go get another one really. I get tired of waiting for maintenance to come out, so I just bring the clipboard inside and ask for a different one. I preflight while the student gets his or her things together and we're out.

Outside of Riddle though, I've learned to accept flying with much less than perfect.
 
Don't feel bad about writing it up. Its the SAFE thing to do. Here at my school its very common to see "could not duplicate" signed by the mechanics but the same problem appears over and over.
 
Besides, who do you think shoulders the blame when something happens and the FAA comes knocking? If there's no record of a recurring problem, I can tell you the answer to that one.
 
The avionics shop we take our planes to is great for analog, but totally clueless when it comes to glass--which now makes up fully half of our fleet. It seems like every time we drop a G1000 off up there, they fix one problem while causing three more. And then, of course, the shop points their finger at Garmin, who blames Diamond, who accuses the shop and so forth. Meanwhile, our plane which just needed a software update is down for two weeks.

yup, that sounds about right! and all the while, the mechs think the pilots broke it to begin with!haha
 
If I have to cancel due to mx, I never get upset because it's easy to call a customer and say "Unfortunately we can't fly today because the plane is in the shop." It's the cancellations due to weather conditions that I sometimes feel bad about because the decision was wrong. For example, last Saturday I was scheduled with a new private student and while it was a great day it was very windy. I heard comment after comment about how rough it was. So, I looked at the weather and decided that the wind was likely to continue to stay strong, so I canceled the flight thinking it was best because the student wouldn't learn a whole lot. So, later on when around the time when the flight was to happen, the wind had become variable at 3kts. Now, that was frustrating to me but I have to keep telling myself that it was the right thing to do even if it was the wrong decision. I guess I'd rather play it safe than regret a decision that I made.
 
If I have to cancel due to mx, I never get upset because it's easy to call a customer and say "Unfortunately we can't fly today because the plane is in the shop." It's the cancellations due to weather conditions that I sometimes feel bad about because the decision was wrong. For example, last Saturday I was scheduled with a new private student and while it was a great day it was very windy. I heard comment after comment about how rough it was. So, I looked at the weather and decided that the wind was likely to continue to stay strong, so I canceled the flight thinking it was best because the student wouldn't learn a whole lot. So, later on when around the time when the flight was to happen, the wind had become variable at 3kts. Now, that was frustrating to me but I have to keep telling myself that it was the right thing to do even if it was the wrong decision. I guess I'd rather play it safe than regret a decision that I made.
I hear ya. It's tough as a CFI because there are lots of times when you know that you can handle it, but you will be using the student as an autopilot the whole time and they won't learn well. It's also tough to walk the line between coddling students and overwhelming them when it comes to weather.
 
Grounding is sometimes necessary, but some people take it a bit too far.

Your landing light is not required, nor necessary during the day. It's probably out because you've had the darn things on for an entire 3 hour x-c. Ya know the old saying, "save the equipment for when you really need it"? :banghead:

It just bugs me to see other pilots use and abuse equipment, then complain (and sometimes ground airplanes) when something doesn't work.
 
Just a short rant. Some of you ppl need to give the mechs. a break. I spent 9 years as an auto tech and had my fair share of intermitent problems. I'd have the car for three days, spend 15 hours on it, not make a dime for the 15 hours (you only get paid for what you fix in the auto industry, not what you do), only to have the customer come in and pick it up, not even get out of the driveway and have it do it again. I would get the page to come up to the drive, and by the time I'd get there, the problem would be gone again.:banghead::banghead::banghead: Thats one of the reasons I got out of the buisness.

So give these guys a little break. Sometimes it's not so easy to duplicate the problem you are experincing. But write it up anyways, and hope the problem gets found sooner rather than later.
 
Just a short rant. Some of you ppl need to give the mechs. a break. I spent 9 years as an auto tech and had my fair share of intermitent problems. I'd have the car for three days, spend 15 hours on it, not make a dime for the 15 hours (you only get paid for what you fix in the auto industry, not what you do), only to have the customer come in and pick it up, not even get out of the driveway and have it do it again. I would get the page to come up to the drive, and by the time I'd get there, the problem would be gone again.:banghead::banghead::banghead: Thats one of the reasons I got out of the buisness.

So give these guys a little break. Sometimes it's not so easy to duplicate the problem you are experincing. But write it up anyways, and hope the problem gets found sooner rather than later.

True. In fairness, maintenance are usually great--if sometimes gruff--people who work hard at a sometimes thankless job. But, man, everywhere I've flown there's always been that one tech you dread having to deal with. The one who, when you see him riding the cart out, makes you wonder, "Ugh. Why did I even bother wasting the ink?"
 
yup, that sounds about right! and all the while, the mechs think the pilots broke it to begin with!haha

What bugs me is when maintenance can't duplicate a situation on the ground and is all pissy at me. "Yes, the CB popped twice in flight. No, I did not imagine it. What was I doing? Straight-and-level." They glare at me and return-to-service it goes. Sheesh. I'm not writing up planes just because I can't get enough of our mechanics' sunny dispositions.

Ooh... or one of my all-time favorite write-ups: a school I was at had an airplane whose stall warning horn wouldn't activate in-flight, but would ground check just fine. So in my write-up I note: "...inop in flight; ground checks okay." The corrective action? A photocopy of POH pages explaining how to ground check the horn and a comment that, indeed, the horn ground checks perfectly. :banghead: A couple write-ups and a hundred hour later, they find the horn was miswired. :bandit:

welcome to aviation... it doesnt get any easier. I always hate avionics problems because sometimes it would "check out" fine when the mechs looked at it, but the problem persisted intermittently in the air...

Can't tell you how many times I've sent the same ac back to mx because the mx guys couldn't duplicate the issue.

I just keep writing it up until it's fixed. And ultimately mgmt can see that it is a loosing proposition to try to return it to service when it just gets squawked again and they don't make money

The avionics shop we take our planes to is great for analog, but totally clueless when it comes to glass--which now makes up fully half of our fleet. It seems like every time we drop a G1000 off up there, they fix one problem while causing three more. And then, of course, the shop points their finger at Garmin, who blames Diamond, who accuses the shop and so forth. Meanwhile, our plane which just needed a software update is down for two weeks.

I don't remember reading any mechanic hate.


I don't see any hate either. Just some whining about issues that don't show themselves consistently. All I am getting at is to understand the nature of the problem, i.e. inconsistent. Worst case scenerio, take the mech. on a flight to show him the concern. Don't call him a stupid fool because he coulden't figure out the complaint of something that took a 2 g load, or turblience, or 30 deg. of bank to duplicate. You simply can't duplicate that stuff on the ground.
 
What I hate is people who don't write things up at all, then I come out to the airplane, run it up, and can't fly it and have to thaw out another airplane, and warm that one up too. Or something that's just stupid like someone not writing up a break that doesn't work (yes, it's happened) then I go out get to play "not an ambi-turner" on a slick ramp as I taxi back to the hangar. Sometimes, the things that need to be written up are not that important, and don't seem like big issues, but that being said, if its a safety issue (any safety issue at all) I don't see any issue writing it up.

Will I write up a door handle that squeaks too much (seen that too)? No, but I won't fly an airplane with an inop tach, or one that bounces too much, or an airplane with ghetto seat rails (I'm not putting pax into an airplane that will have them snap on you). There are things that we pilots don't understand though, that's why you should buy a maintenance manual for the airplane you're flying, and read through it thoroughly. For example, one of our 207s flies slightly sideways, and has a slight flap assymetry with flaps 10. I asked the mechanic about that, and he showed me in the maintenance manual where cessna corrects for an airplane that flies funny by dialing a flap down on one side or the other to correct for it. Strange, but that's what the book says.
 
What I hate is people who don't write things up at all, then I come out to the airplane, run it up, and can't fly it and have to thaw out another airplane, and warm that one up too. Or something that's just stupid like someone not writing up a break that doesn't work (yes, it's happened) then I go out get to play "not an ambi-turner" on a slick ramp as I taxi back to the hangar. Sometimes, the things that need to be written up are not that important, and don't seem like big issues, but that being said, if its a safety issue (any safety issue at all) I don't see any issue writing it up.

Will I write up a door handle that squeaks too much (seen that too)? No, but I won't fly an airplane with an inop tach, or one that bounces too much, or an airplane with ghetto seat rails (I'm not putting pax into an airplane that will have them snap on you). There are things that we pilots don't understand though, that's why you should buy a maintenance manual for the airplane you're flying, and read through it thoroughly. For example, one of our 207s flies slightly sideways, and has a slight flap assymetry with flaps 10. I asked the mechanic about that, and he showed me in the maintenance manual where cessna corrects for an airplane that flies funny by dialing a flap down on one side or the other to correct for it. Strange, but that's what the book says.


You sure know your airplane pprag. But one thing I can't figure out, do you love to hate it, or is it a love hate relationship?:bandit:
 
I don't see any hate either. Just some whining about issues that don't show themselves consistently. All I am getting at is to understand the nature of the problem, i.e. inconsistent. Worst case scenerio, take the mech. on a flight to show him the concern. Don't call him a stupid fool because he coulden't figure out the complaint of something that took a 2 g load, or turblience, or 30 deg. of bank to duplicate. You simply can't duplicate that stuff on the ground.

No kidding....
 
You sure know your airplane pprag. But one thing I can't figure out, do you love to hate it, or is it a love hate relationship?:bandit:

I'm mostly indifferent to it. Its an airplane, and at times its fun to fly, but really, its just an airplane, like any other. Sometimes its better, sometimes its worse.
 
Back
Top