Ground doesnt say go to Tower?

I'll hazard a guess you don't fly 121.

My company says "monitor guard on a secondary radio when not in use" in our FOM. Our FCOM specifies that we do this on the before takeoff checklist, which, while no specific minute-based time frame is given, generally states it is to be accomplished when the second engine is started.
121 or not, I think you posted the first clue to proactive radio use. If you follow my previous post. with one on ground and one switched to tower when approaching the takeoff position, both radios are clearly "in use".

Guard on taxi out has saved a few of our guys' butts when they accidentally switched to the wrong frequency at busy airports. Yeah, it sucks on the east coast with all the children yelling at each other, but it's worth it.
I can see this too. However, if your radios were tuned up on ground and tower (as I described above), my bet is they would have used those frequencies BEFORE they had to resort to trying to find you on Guard
 
121 or not, I think you posted the first clue to proactive radio use. If you follow my previous post. with one on ground and one switched to tower when approaching the takeoff position, both radios are clearly "in use".


I can see this too. However, if your radios were tuned up on ground and tower (as I described above), my bet is they would have used those frequencies BEFORE they had to resort to trying to find you on Guard

What should I be doing with 2 different radios? How about listening to the other important 121 channel - ops?

The only thing I've ever used Com 2 for is for inbound calls to ramp while on the movement area so I can have ground up. No need for ground in com 2 unless you're picking up a clearance on 1 while stopped.

I really don't see a valid reason for both tower and ground on two radios if you follow SOP and FAR/AIM guidance on where to "flip the switch."
 
What should I be doing with 2 different radios? How about listening to the other important 121 channel - ops?

The only thing I've ever used Com 2 for is for inbound calls to ramp while on the movement area so I can have ground up. No need for ground in com 2 unless you're picking up a clearance on 1 while stopped.

I really don't see a valid reason for both tower and ground on two radios if you follow SOP and FAR/AIM guidance on where to "flip the switch."
Please re-read my original post. We seem to be "arguing" about nothing here
 
Back
Top