CoffeeIcePapers
Well-Hung Member
Obtain Basic System?
?
Obtain Basic System?
A bearing is always "to" a fix, a radial is always "from" a fix. So if you are flying on the 090 bearing to an NDB, you are flying a 090 course. If you are flying on the 090 radial to a VOR, you are flying a 270 course. Conversely, if you are flying the 090 bearing from an NDB, you are flying a 270 course, and if you are flying the 090 radial from a VOR, you are flying a 090 course....I remeber the term "bearing" since there's no radials but is it a bearing to the point or from it? ...
A bearing is always "to" a fix, a radial is always "from" a fix. So if you are flying on the 090 bearing to an NDB, you are flying a 090 course. If you are flying on the 090 radial to a VOR, you are flying a 270 course. Conversely, if you are flying the 090 bearing from an NDB, you are flying a 270 course, and if you are flying the 090 radial from a VOR, you are flying a 090 course.
Hope that helps.
that's what i thought as wellIt's courses to, bearings from. So the bearing isn't to the fix. But in your last sentence, you describe it correctly.
that's what i thought as well
N1234, Hold Southeast of PWF on bearing 350, 3 mile leg, left turns.
You will notice that the information in this "ATC Bible", the specific phraseology example (specified radial, course, bearing, etc.) does not explain whether the bearing is 'to' or 'from'.Holding Phraseology is in the "ATC Bible", FAA Order JO 7110.65T.
thats makes sence, but it gets very confusing if you are holding say with a dme distance such as "hold 10nm west of the UKW VOR on the east side of the XAMPL intersection". XAMPL intersection would be at 10 DME west. so if you don't have a GPS but do have DME you would have to use distance as the reference...or maybe i am over thinking this but it seems interesting.That's the problem. Even the FAA knowledge test, as I recall, includes the term "from" and "to" when issuing bearings the term bearing. If unsure, clarify.
Of course, there really shouldn't be much confusion in a holding clearance - the holding insructions will start with the quadrant in which the holding course is, which is the clue to what is meant.
So, to use Carlos' example
That "southeast" is a pretty good clue that the bearing is "to" the station since the 350 bearing "from" the station is northwest.
You will never get a holding instruction phrased like that. It would be "Hold east of XAMPl intersection, bla,bla,bla." in the format described in the manual."hold 10nm west of the UKW VOR on the east side of the XAMPL intersection".