Engine Change

TonyC....I was stationed at Mildenhall in 90-91. I went on the first trip to Souda Bay when they were moving the operation from Helinikon to Crete. We had maintainers from Kadena, Mildenhall, and Eielson there at one time--what a headache, but some really good times for my three trips I made with the RC's. The aft mount is held up by a smaller cone bolt the passes through the hangar bracket and held on with a nut. Folks would probably be surprised as to how engines are held onto fuselages/pylons. I liked the TF-33-P9 on the V and U models better--no thrust reversers, but the 120 KVA generators they had were heavy bastages. Never went to Saudi with the RC's, but we took care of the planes transiting Mildenhall--especially the KC-135E (tail # 1514) that did all the parts/people hauling back and forth. It always seem to break for us in the middle of the night :-) We possibly did cross paths at one time or another.
As a side note.....Souda Bay has changed a lot since we opened it up 16 or so years ago. Passed through there on my way to Saudi for a different trip and they have fueling pits now and the taxiways are actually set up (widened) for the bigger aircraft. They've dumped a lot of money into the AF operation there. Good chattin' with ya as it brings up some good memories and seems just like yesterday.

Pac Man
 
I'm certain we've crossed paths. I was on the 2nd or 3rd crew to get to Souda Bay. On our first trip we stayed in a hotel in town, and on our next trip they had the NATO barracks open for us. Yikes.

I flew a couple months out of EGUN on Bosnia-Herzogovina missions. Put it this way, I spent enough time in England during my RC career that the blood banks won't take my blood -- Mad Cow stuff. :insane:

Good ole "Five One Four" -- I've got a bunch of hours in the right seat, the left seat, and the back seats. :)


Fond memories...
 
LOL Ask American how changing engines with fork lifts worked for them.

Douglas approved to that procedure. It wasn't just American that was changing engines that way it was also United and Northwest. They just got lucky it was an American bird that crashed. Having said that the engine lost did not cause the plane to crash it was a series of controllable events.
 
The engine loss caused the retraction of the slats and flaps on the left wing, when the pilots slowed the aircraft down per procedures the left wing stalled. Not sure I'd say thats a controllable event.
 
Forklift was just to move the engines off and on the truck. We used a crane smarty pants!:p:) Forklift+engine change= bad news.
 
When the engines were swapped from the aircraft, they were suspended from the crane with either straps or chains, not just held up by the forks.
 
Back
Top