TonyC....I was stationed at Mildenhall in 90-91. I went on the first trip to Souda Bay when they were moving the operation from Helinikon to Crete. We had maintainers from Kadena, Mildenhall, and Eielson there at one time--what a headache, but some really good times for my three trips I made with the RC's. The aft mount is held up by a smaller cone bolt the passes through the hangar bracket and held on with a nut. Folks would probably be surprised as to how engines are held onto fuselages/pylons. I liked the TF-33-P9 on the V and U models better--no thrust reversers, but the 120 KVA generators they had were heavy bastages. Never went to Saudi with the RC's, but we took care of the planes transiting Mildenhall--especially the KC-135E (tail # 1514) that did all the parts/people hauling back and forth. It always seem to break for us in the middle of the night We possibly did cross paths at one time or another.
As a side note.....Souda Bay has changed a lot since we opened it up 16 or so years ago. Passed through there on my way to Saudi for a different trip and they have fueling pits now and the taxiways are actually set up (widened) for the bigger aircraft. They've dumped a lot of money into the AF operation there. Good chattin' with ya as it brings up some good memories and seems just like yesterday.
I'm certain we've crossed paths. I was on the 2nd or 3rd crew to get to Souda Bay. On our first trip we stayed in a hotel in town, and on our next trip they had the NATO barracks open for us. Yikes.
I flew a couple months out of EGUN on Bosnia-Herzogovina missions. Put it this way, I spent enough time in England during my RC career that the blood banks won't take my blood -- Mad Cow stuff. :insane:
Good ole "Five One Four" -- I've got a bunch of hours in the right seat, the left seat, and the back seats.
Douglas approved to that procedure. It wasn't just American that was changing engines that way it was also United and Northwest. They just got lucky it was an American bird that crashed. Having said that the engine lost did not cause the plane to crash it was a series of controllable events.
The engine loss caused the retraction of the slats and flaps on the left wing, when the pilots slowed the aircraft down per procedures the left wing stalled. Not sure I'd say thats a controllable event.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.