Engine Change

Van_Hoolio

Well-Known Member
Image001.jpg


Image002.jpg


Image003.jpg


Image004.jpg


I heard they weren't getting an N2 indication. Not sure why that requires a change, but that's what they did. So how many million is one of those worth?

Mike
 
Comair had some of their guys over here, assisted by AvDyne Aeroservices, the BWI-based company my company shares a building with.
 
I'll hit my old man up, tell him the N#, and let him tell me when that engine will be in his shop for the fixin'.
 
Now that is a great post! Intersting and never have viewed this before! Do they just change the engine like that without taking it indoors or anything? Just interesting they pull a truck up and crank it on up and change it there..
 
That sure looks a lot easier than dropping a TF-33 engine off a B-52 :)

Three mounting bolts -- piece of cake!


(After digging through cowlings and removing ductwork, accessories, and countless cannon plugs.)


I had an RC-135 at Osan that underwent an engine change on the ramp, a TF-33. One of the nice things about it's location and installation is we could overservice the right main landing gear strut and underservice the left to make the airplane lean left, making the engine more accessible. (It was #2.) We ran into problems with one of the mounting bolts -- .003 inch out of tolerance, so we had to wait for a part from Texas.

That was a long shopping trip.



.
 
Tony, how does it take to change engine on RC-135? or RJ...just wondering. :)

On B-52's, it will take almost a whole 8-10 hour shift to remove and replace a TF-33 engine. Thats factoring in the removal of cowling, and also that nothing goes wrong during the process. It has the tendancy to be a pain in the rear most of the time though:banghead:
 
I'm the one that sent the engine there. An engine change takes anywheres from 5-8 hrs, but can go longer if some other issues arrise
 
I'm the one that sent the engine there. An engine change takes anywheres from 5-8 hrs, but can go longer if some other issues arrise


Did your contractor driver get home in time to use his Bengals tickets?

I escorted the mx crew out to the aircraft when the pilots got there the night before last, and the guy told me that the gearbox "took a s#|t" among other things. My boss bought those guys lunch earlier in the day in exchange for letting some of his starry-eyed employees crawl around the thing. I also conned my way into a CHQ 145 also parked outside our offices on Friday. I fit!
 
An engine change on an RC-135 could be done in an 8-12 hour shift--similar to what was mentioned with the TF-33 on B-52. That would be with at least three folks that know what they are doing (efficient) and having all equipment available. Doing an engine change at Offutt where the RC-135 are currently based is different than doing one at Osan where TonyC was stuck waiting. There is no support there for RC-135's and would drag out a task like an engine change. It always seems that you'd run into probs during the engine change--either with equipment or support from other shops (NDI or sheetmetal)....and that's what causes them to be drawn out a bit longer.

TonyC....where were you stationed where you worked the RC? Was it back in the day when they were stationed at Kadena and Eielson along with Offut? I worked the RC's and EC's at Mildenhall as and engine dude---I have many years on TF-33's--many variations of.


Pac Man
 
TonyC....where were you stationed where you worked the RC? Was it back in the day when they were stationed at Kadena and Eielson along with Offut? I worked the RC's and EC's at Mildenhall as and engine dude---I have many years on TF-33's--many variations of.


Pac Man

I was stationed at Offutt, and flew TDY to Kadena, Eielson, Mildenhall, and Athens. When the active duty unit at Eielson moved to Offutt, we stopped going there. Later we added Riyadh, and then the active duty unit at Eielson moved to Offutt, so we stopped going there. We also moved from Athens to Souda Bay, Crete.

I was also Ops Officer at Riyadh when we needed to change a #3 engine (no generator, but it had the cartridge starter) but all we had was a #1/#2/#4(generator, but no cart start). When it looked like it was going to take forever to get a #3 over there, we undertook the task of "converting" the one we had. Nobody at the time had heard of it being done in the field. It was a Wee bit more difficult than just strapping a crate engine in place. Except for swapping two wires on the generator, it all came off without a hitch. Somebody equated it to doing a sex change on the TF-33.

My experience with both engine changes and the folks involved was great -- very motivated folks. Osan would have been around fall of '91, and Riyadh was summer of '94.

Perhaps you're familiar with the mounting to the airframe -- I realize the TF-33 is used on different airplanes (B-52, C-141) so the specific mounting might be different. On the RC, there were 2 eyebolts at the front, and something at the back of the engine. The eyebolts were riveted into the wing, and had a 1/2 inch hole through which passed a bolt to connect the engine. In our case, the hole in one of those bolts, the "eye," was 3 one-thousandths of an inch too large. Talk about major headache. And all for a little oil leak. :)

(Oh, and I still have the "bad" eyebolt -- a trophy. :D)

OH, and I've deployed to Mildenhall plenty of times -- we may have crossed paths. I recall an issue we had once with some fairly large gouges in the first stage compressor blades that appeared to be "fresh." There were a lot of bodies conferring to determine the proper course of action. Were you the guy sayin', "Hey, it's no big deal. You can fly it. I'll stay right here, though." ;)





.
 
Did your contractor driver get home in time to use his Bengals tickets?

I escorted the mx crew out to the aircraft when the pilots got there the night before last, and the guy told me that the gearbox "took a s#|t" among other things. My boss bought those guys lunch earlier in the day in exchange for letting some of his starry-eyed employees crawl around the thing. I also conned my way into a CHQ 145 also parked outside our offices on Friday. I fit!

I'm not sure. He must have hauled ass to get back in time. I can't stand the Bengals or their saying. "Who Dey?" sounds retarded. Go Chargers!:nana2:
I'm surprised we did an engine change there. It seems as if we always have to change an engine or a cockpit window in JFK lately. Mysterious and a pain in the butt.
 
7129....what a hunk of junk. :D

On a more serious note 7014 and BGR dont mix. That think has been AOG here 3 times (twice overnight) in the past year and a half. With 30 sumpfing thousand hours on a streched out bizjet, what do you expect?
 
Back
Top