upup89
Well-Known Member
Didn't read about the latest thing. Of the crashes I can remember from when I was doing research on the company, there was one not long before I was hired that involved a guy taking off in to "medium-IFR", apparently (apparently, who knows) losing control, and crashing. A couple of engine failures over maybe 5 years. And a couple of dudes running out of gas because they were dumb.
My experience with maintenance was good. The guys at CPS, at least, know the 210 very, very well. They're Characters, but they know how to fix 520s, 550s, and the 210 airframe like they were born to it because they've been doing it for God knows how long. Avionics were sometimes a little dicier, but as far as the airframe and powerplant goes, I would fly in any weather (and did) with those guys wrenching on the plane.
I only had two "uhoh" moment working there (as far as the equipment goes), and those were totally unforseeable. This is in what, about 2500 hours.
That particular segment of the industry is extremely dangerous, at least relatively speaking. Don't kid yourself about that. But if you're going to do it, I think FLX is one of the "safer" places to do it. And if that's not enough, you still get your own personalized wheelbarrow in which to carry your balls. The last part was a lie. Sadly.
I think this is a good write up for the company. The MX guys know what they are doing. If you have something broken all you have to do is write it up and you can bet it will be fixed within a day or two.
It is single engine in some pretty hard weather to fly in but I certainly had a blast doing it. The 210 is a great airplane and its amazing the trust you can put into it even with 20,000 some odd hours on the airframe. Yea I scared myself just a few times but overall I am so very glad that I spent some time there.