DC-9 Guys

Hey I have a flight director also. It's not as fancy as some the equipment you guys operate though.

Oh and Jtrain, you suck at life!:sarcasm::D
 
The Q400's have a new flight director...

Each is now equipped with a little Asian man in the bucket... when crews start to think about calling out, he pops out yelling,"Plane surface now is not broken it goes!", while pointing at us.

(im sorry... too much fun using babelfish to create engrish)
 
The most fun trip I had (even though I cheated a little bit... coulda gone naked but didn't), was one in which I got to take the leg from MSP to MCI and I hand flew it from T/O to touchdown. That was nifty. (A/P was not inop btw)

Hope you weren't in RVSM
 
Completely disagree. The CRJ 700/900 has to be one of the best designed aircraft in the passenger airline business. Absolutely wonderful to handfly with an awesome cockpit design and logical layout. Jumpseaters are always in awe looking at the cockpit. Had a AA 767 Checkairman on the jump two days ago and he was impressed.

I agree. I like the way things are layed out as well. Pretty easy and fun to fly when you get the automation down.

Thats just because you're lazy Triple7.:D See I like aircraft like the DC9 because I actually get to make things happen. In aircraft like the CRJ700/900, everything is happening automatically. You are not flying that aircraft. That aircraft is flying you.:D


Of course the older guys like the CRJ. They are old bulls and have seen it all. I'm a young bull.:D

...And whats wrong with being lazy? :D
 
The most fun trip I had (even though I cheated a little bit... coulda gone naked but didn't), was one in which I got to take the leg from MSP to MCI and I hand flew it from T/O to touchdown. That was nifty. (A/P was not inop btw)

Its not very difficult to handfly the 700/900 from t/o to touchdown. It is a very smooth handling airplane. Now if you can handfly down from FL180 raw data thru a thick overcast layer and shoot a raw data ILS down to mins I'll high-five you on that one:D

Hope you weren't in RVSM
:yeahthat:
 
Now if you can handfly down from FL180 raw data thru a thick overcast layer and shoot a raw data ILS down to mins I'll high-five you on that one:D

That is something every pilot should be able to do, not something special. I guess some people would rather be button pushers than pilots:dunno: That's not directed at you Marcus, just a general statement.

Alex.
 
I personally haven't met anyone that loves the series. I've jumpsat plenty of times on the 88 and that poor FO is reaching all over the place on his checklists. Jumpsat on a 757 with an FO that flew the 88 for 3 years. He said it felt like 10:D Delta 76 FO jumpsat with on my flight from Pit. He was a previous 88 Capt. Doug can hold 88 capt if he wants to. Etc, Etc. But I'm sure the plane would be a blast to fly around the pattern here and there, but for work? Nah, I'll pass.

You'd pass up on that pay check because it's a real mans plane as Doug calls it? :confused:

Completely disagree. The CRJ 700/900 has to be one of the best designed aircraft in the passenger airline business. Absolutely wonderful to handfly with an awesome cockpit design and logical layout. Jumpseaters are always in awe looking at the cockpit. Had a AA 767 Checkairman on the jump two days ago and he was impressed.


Anyway, I finally had my first CRJ-900 experience a few weeks ago. I flew from PHX-LGB.

Not a terribly long flight. Now I'm saying this as a customer who's a plane enthusiast. Might be hella fun up front, but, the plane looks and feels kinda really cheap. I really didn't see too much improvment over the 200. The wing on the 900 looks amazingly simple, at first I thought it was a simple "plain" type flap. But, no it's slotted, but looks no where as neat or complex as say a double slotted fowler on something like a 737NG or 757. The "boards" on the wings are super small, and look like tabs, and I have to wonder if they really "kill" lift over the wings with them being so very small.

While I've never flown in a EMB-170/190. That plane looks far better thoughtout from interior space to the wing, which actually has a mainline-esque wing. Probably because it really should be a mainline craft..

Anyway, I probably sound like an a.net nerd, but oh well just my opinion from riding in the back!

I wasn't too impressed with the CRJ, I have better hopes for the C-Series, and I love the super 80's and MD-90!
 
Hope you weren't in RVSM

Can you point me to the guidance that says that the autopilot must be ENGAGED in RVSM? I know it's an equipment requirement, but I haven't been able to find the reg that says it must be engaged.
 
Can you point me to the guidance that says that the autopilot must be ENGAGED in RVSM? I know it's an equipment requirement, but I haven't been able to find the reg that says it must be engaged.

:yeahthat::yeahthat::yeahthat:
 
Its not very difficult to handfly the 700/900 from t/o to touchdown. It is a very smooth handling airplane. Now if you can handfly down from FL180 raw data thru a thick overcast layer and shoot a raw data ILS down to mins I'll high-five you on that one:D


:yeahthat:


I should have specified.... I was flying the CRJ-200 that time.

And about flying through an overcast with raw data and raw data ILS.... good luck not getting in trouble for that! FOQA catches that real easy, even if I were to be perfect.
 
There is no regulation requiring the autopilot to be engaged about 290.

I thought there was, I went looking for it when I flew with a captain who doesn't use the AP, and I found out I was wrong.
 
I should have specified.... I was flying the CRJ-200 that time.

And about flying through an overcast with raw data and raw data ILS.... good luck not getting in trouble for that! FOQA catches that real easy, even if I were to be perfect.

Why?

When it is windy and ORD has us intercepting the ILS 25 out a lot of time I will turn the AP and FD off and hand fly the whole ILS.
 
I should have specified.... I was flying the CRJ-200 that time.

And about flying through an overcast with raw data and raw data ILS.... good luck not getting in trouble for that! FOQA catches that real easy, even if I were to be perfect.

Nothing says we can't unless that's a limitation on the -900. In fact, our manual says we should be proficient at all three levels of automation.
 
Nothing says we can't unless that's a limitation on the -900. In fact, our manual says we should be proficient at all three levels of automation.

Oh. Heh. Right, I'm supposed to RTFM. :p But, I guarantee you, if you were to ask APDs/Check Airmen I'll bet most would want FD on more often than not (heck, apparently with the FAA on board we've got to). With specific reference of the RNAV SID, our recurrent ground school instructor (a checkairmen) specifically said that the AP flies it better so that's why we should feel fine about using it for the SID.... "and if the automation screws up the SID you'll have more leverage to avoid a violation".

Well I do try my best to do raw data takeoffs out of outstations and fly raw data as long as I can, but I haven't gotten the opportunity in a while to do a raw data ILS with an overcast. Plenty of raw data visuals. I tend to always turn off the FD guidance for visuals....
 
Oh. Heh. Right, I'm supposed to RTFM. :p But, I guarantee you, if you were to ask APDs/Check Airmen I'll bet most would want FD on more often than not (heck, apparently with the FAA on board we've got to). With specific reference of the RNAV SID, our recurrent ground school instructor (a checkairmen) specifically said that the AP flies it better so that's why we should feel fine about using it for the SID.... "and if the automation screws up the SID you'll have more leverage to avoid a violation".

Well I do try my best to do raw data takeoffs out of outstations and fly raw data as long as I can, but I haven't gotten the opportunity in a while to do a raw data ILS with an overcast. Plenty of raw data visuals. I tend to always turn off the FD guidance for visuals....

An RNAV departure youre just required to maintain .5 NM left or right of course. Monitor Progress page 2 and tada!... you can hand fly it. On the big boys we typically hand fly up to 18 or so.

The CRJ-200 was super easy to hand fly... I made sure that I could hand fly any approach down to minimums without any guidance as good or better than the AP.
 
An RNAV departure youre just required to maintain .5 NM left or right of course. Monitor Progress page 2 and tada!... you can hand fly it. On the big boys we typically hand fly up to 18 or so.

The CRJ-200 was super easy to hand fly... I made sure that I could hand fly any approach down to minimums without any guidance as good or better than the AP.

Well apparently .5 L/R is too small a margin for us? :dunno:
 
A long time ago I was jumpseating over to BHM. We were at about 8000ft and doing 250 when approach told the guy we were cleared for a visual. I started laughing. The Capt asked what was so funny and I explained that in the 737, we would be half way to Biloxi getting rid of all the energy.

Birmingham used to have the "High Dive to 5" approach -- a HI ILS into Runway 5 (although in '99 they changed it to Runway 6) that required 13 degrees nose low leaving the IAF to make the stepdown fixes.

It was pretty sporty in a jet like the T-38...I can only imagine how that would go in an airliner.
 
Birmingham used to have the "High Dive to 5" approach -- a HI ILS into Runway 5 (although in '99 they changed it to Runway 6) that required 13 degrees nose low leaving the IAF to make the stepdown fixes.

It was pretty sporty in a jet like the T-38...I can only imagine how that would go in an airliner.

Do they still do High TACAN approaches? And yes, we aimed for at least 4000fpm leaving the fix.
 
Back
Top