XC time for an Instrument or even Commercial

Blip16

Well-Known Member
i have a student who will be done hopefully with his PPL in the next 4-5 weeks (weather providing) anyway i am wondering about the XC requirement for an Instrument rating, does it have to be AFTER he gets his PPL or can the 8 or so solo hours he will have count towards the 50? same with the commercial license, will they count for that?
 
The 61.65 requirement for "At least 50 hours of cross-country flight time as pilot in command," for the instrument rating includes the student's solo cross country time, as does the 61.129 requirement for "100 hours of pilot-in-command flight time, which includes at least ... 50 hours in cross-country flight."

The key is the term "pilot in command" Go back to 61.51(e) and you'll see that a student pilot's solo time is counted by the FAA as PIC time.

On the other hand, that may not be true for any of the dual requirements.
 
The 61.65 requirement for "At least 50 hours of cross-country flight time as pilot in command," for the instrument rating includes the student's solo cross country time, as does the 61.129 requirement for "100 hours of pilot-in-command flight time, which includes at least ... 50 hours in cross-country flight."

The key is the term "pilot in command" Go back to 61.51(e) and you'll see that a student pilot's solo time is counted by the FAA as PIC time.

On the other hand, that may not be true for any of the dual requirements.
so if they got their PPL with say 10 hours of PIC XC (over 50nm of course) they would only need another 40 for the instrument and even that could be dual working on the instrument procedures i assume?
 
so if they got their PPL with say 10 hours of PIC XC (over 50nm of course) they would only need another 40 for the instrument and even that could be dual working on the instrument procedures i assume?

That's correct assuming those ten hours before PPL were solo. (Only time a student pilot can log PIC).
 
so if they got their PPL with say 10 hours of PIC XC (over 50nm of course) they would only need another 40 for the instrument and even that could be dual working on the instrument procedures i assume?
Yes. Once having the PPL, the pilot may log PIC time when the sole manipulator of the controls of an aircraft within the pilot's ratings. So, after the PPL, those dual flights are logable by the student as PIC.

Although a lot of folks recommend that the new pilot do cross countries without a CFI to build experience, considering how lacking the 61.65 requirements are for enroute training, a couple of extra instrument cross countries is hardly a bad thing.
 
Yes. Once having the PPL, the pilot may log PIC time when the sole manipulator of the controls of an aircraft within the pilot's ratings. So, after the PPL, those dual flights are logable by the student as PIC.

Although a lot of folks recommend that the new pilot do cross countries without a CFI to build experience, considering how lacking the 61.65 requirements are for enroute training, a couple of extra instrument cross countries is hardly a bad thing.
i was more or less thinking it is a good way for the student to build the necessary time a little cheaper.

approximately $6000.00 vs. $10,000 if they rented from our company and didn't join a club, etc
 
i was more or less thinking it is a good way for the student to build the necessary time a little cheaper.

approximately $6000.00 vs. $10,000 if they rented from our company and didn't join a club, etc
I'm not sure how you get cheaper for airplane plus CFII than for airplane alone.

If you're planning on most of your instructional flights also being cross countries, I'd be curious how it works out. It's not a bad concept, bith IR training being as approach-intensive as it is, I have a hard time seeing how a pilot will reach checkride proficiency regularly going at least 50 NM away on a flight to do approaches in the same amount of overall instructional time as doing multiple approaches locally.

Maybe it can be done. I'd definitely be curious to see the syllabus
 
I'm not sure how you get cheaper for airplane plus CFII than for airplane alone.

If you're planning on most of your instructional flights also being cross countries, I'd be curious how it works out. It's not a bad concept, bith IR training being as approach-intensive as it is, I have a hard time seeing how a pilot will reach checkride proficiency regularly going at least 50 NM away on a flight to do approaches in the same amount of overall instructional time as doing multiple approaches locally.

Maybe it can be done. I'd definitely be curious to see the syllabus
you make a valid point. i was saying it would be cheaper than 40 hours of solo building the XC time, then another 40 hours with me doing the instrument stuff. If i were to do the XC portion with him as well, i probably wouldn't do all 40. just stuff i remember hearing about in CFII groundschool as possible training methods
 
Back
Top