Student Pilot works for the FAA!

Buda6868

New Member
Guy came in that works for the FAA as an engineer. He has over 70 hrs. and no certificate. Wants me to get him to his checkride.

No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

I m starting to get nervous about this guy, any thoughts!
 
[ QUOTE ]
Guy came in that works for the FAA as an engineer. He has over 70 hrs. and no certificate. Wants me to get him to his checkride.

No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

I m starting to get nervous about this guy, any thoughts!

[/ QUOTE ]

Could he be doing some under cover work? Why wouldn't he have someone from the FAA do his ride?
confused.gif
 
[ QUOTE ]
No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

[/ QUOTE ]

Well it is illegal. You should be happy he pointed it out instead of a rabid inspector who then proceeded to eat your certificate. Get it fixed before something happens.
 
[ QUOTE ]
No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

[/ QUOTE ]

A Garmin 196 cannot be "installed" in a certified airplane.

It is a "handheld" regardless if it has a semipermanate mounting bracket holding it. Therefore there is no entry in the airplanes W&B info.

Same goes for anyothe peice of "handheld" equipment (XM-radio, iPod, Ect.)
 
A FSDO busted my old flight school for replacing the stock glare shields in a 182 with rosin glare shields. Somebody took it to a FSDO for a CFI ckrd and got pink slipped for it. They had to get an STC.....be very careful around any fed. They're not necessarily all bad people, but too many of them adhere to the philosophy that "a violated pilot is a safer pilot".

It's technically the owner or operator's responsibility to insure that this stuff is done correctly, but when you hold a CFI certificate the Feds have little tolerance for sloppiness.
 
[ QUOTE ]
Guy came in that works for the FAA as an engineer. He has over 70 hrs. and no certificate. Wants me to get him to his checkride.

No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

I m starting to get nervous about this guy, any thoughts!

[/ QUOTE ]

I'm glad he is over there at Northwest Regional and not over here at Hicks.
 
[ QUOTE ]
A FSDO busted my old flight school for replacing the stock glare shields in a 182 with rosin glare shields. Somebody took it to a FSDO for a CFI ckrd and got pink slipped for it. They had to get an STC.....

[/ QUOTE ]
They wouldn't accept a re-calculation of the W&B?
 
[ QUOTE ]
It is a "handheld" regardless if it has a semipermanate mounting bracket holding it. Therefore there is no entry in the airplanes W&B info.

Same goes for anyothe peice of "handheld" equipment (XM-radio, iPod, Ect.)

[/ QUOTE ]

I'm not too familiar with how the mount works in these planes but if it is mounted/bolted to the dash wouldn't that be considered a part of the airplane and need to be added to the W&B? I can understand the actual handheld GPS but the mount is a whole different animal right?
 
[ QUOTE ]
A FSDO busted my old flight school for replacing the stock glare shields in a 182 with rosin glare shields. Somebody took it to a FSDO for a CFI ckrd and got pink slipped for it. They had to get an STC.....


They wouldn't accept a re-calculation of the W&B?

[/ QUOTE ]

Only if it was a standard part from the manufacturer. Otherwise, you have to have an STC. Technically, they can declare an aircraft un-airworthy for a friggin yoke clip. I've heard some crazy stuff from FSDOs. Things like busting someone b/c one static wick was shorter than the rest (they called it a non-standard part and wanted to see the STC) or flying with a loaner transponder that was the exact same make and model as the original(the 24 month inspection was on the OTHER transponder not the loaner). I think these guys sit in their offices and invent ways that aircraft can be unairworthy.
 
[ QUOTE ]
Only if it was a standard part from the manufacturer. Otherwise, you have to have an STC. Technically, they can declare an aircraft un-airworthy for a friggin yoke clip. I've heard some crazy stuff from FSDOs. Things like busting someone b/c one static wick was shorter than the rest (they called it a non-standard part and wanted to see the STC) or flying with a loaner transponder that was the exact same make and model as the original(the 24 month inspection was on the OTHER transponder not the loaner). I think these guys sit in their offices and invent ways that aircraft can be unairworthy.

[/ QUOTE ]

Those are all legitimate causes for "unairworthyness", even if they are nit-picky.
 
Not saying they aren't, but pink slipping a guy for flying an airplane b/c of a short static wick is a little harsh. Does anyone in the flying world check every single static wick on the plane? Maybe they should start.
smile.gif
 
[ QUOTE ]
Guy came in that works for the FAA as an engineer. He has over 70 hrs. and no certificate. Wants me to get him to his checkride.

No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

I m starting to get nervous about this guy, any thoughts!

[/ QUOTE ]

Run! What does he do for the FAA? Is he from the Ft. Worth FSDO? There are some cool people down there, but I've heard stories about some of the others!
 
[ QUOTE ]
Those are all legitimate causes for "unairworthyness", even if they are nit-picky.

[/ QUOTE ]

That may be so, but too many people working for the FAA have no "real world" experience...and you can usually tell which ones they are. Am I saying go ahead and fly and unairworthy airplane? No, but static wicks?? Come on!! There are people out there busting regs far worse than the guy flying his Cessna that's missing a static wick.

I know of a guy who is NOT an A&P who was replacing an inverter on the jet that he operated. The fed walked into the hanger and saw him doing it. How do I know? I was there when it all happened. Did anything happen to the guy? NOPE! He's also worked on the fuel and electrical system, but the feds aren't after him. So don't bother me or anyone else about a freakin static wick on a Cessna...unless of course it's a Cessna Citation...that's a different animal...
 
Here's another one. FSDO sent a plane back on a special flight permit b/c the mx inspector said the brakes were "too loose." So, the FBO spends money repairing that and guess what? The brakes were LOOSER than before. When the A&P was questioned, he pulled out the Cessna mx manual and showed them where it said that the brakes were how they were SUPPOSED to be. Flew the plane back to the FSDO, and the same inspector checks the plane out. "Hey! This is worse than yesterday!" So, the student pulls out the copy of the page he made of the Cessna manual to show the inspector. The inspector's response: "Oh. Okay, then." No, "Sorry I had your FBO spend $400 fixing something that wasn't broke," nada.
 
At mt school we had the FSDO ground a plane becasue the upholstery of the front seats didn't match that of the rear seats. Then they gave the school a seminar about airworthiness, and explained how dents in the wings are no problem. But if the color of the front seats clashes with the reart seats, that's a realy big problem.
banghead.gif
 
To update, I went to the mx logs and sure enough the 196 is there.

He is correct to idenify the WB problem, but get real. I do follow the FARS, but am I being shallow to follow every rule to the tee ( I do, and know I should). Should I cancel all flights untill this problem is fixed?

Should I deny flying in this airplane untill the WB is corrected by 1 lb.? Will this piss off the flight school that is so good to me?
 
The school I'm at follows every rule, so I am sure they have covered their A##. I am just speculating on the 196 WB.
 
talking about the faa, they decided to make a day of it at the airport today. i swear i wouldnt of been surprised if i saw them haveing a picnic in the middle of the taxiway. they were everywhere. and i was stupid enough to try and sneak out. next thing i know i have a couple feds running out to my taxiing aircraft. i guess its a good thing i make sure everything is in order. oh well the good news is im still a pilot
laugh.gif
 
[ QUOTE ]


Run! What does he do for the FAA? Is he from the Ft. Worth FSDO? There are some cool people down there, but I've heard stories about some of the others!

[/ QUOTE ]

Circle wins a square!

There's an ENORMOUS difference between an "Air Safety Inspector" and an "Air Carrier Inspector" when they're in your aircraft.

Some are out there just 'checking the box' for a variety of reasons, whereas others are out there actually observing.
 
[ QUOTE ]
[ QUOTE ]
Guy came in that works for the FAA as an engineer. He has over 70 hrs. and no certificate. Wants me to get him to his checkride.

No problem, but then he starts ranting about a Garmin 196 that was installed in the dash but was not included in the weight and balance of the airplane. The thing weighs less than a 1 lb.

I m starting to get nervous about this guy, any thoughts!

[/ QUOTE ]

I'm glad he is over there at Northwest Regional and not over here at Hicks.

[/ QUOTE ]

If its anything like the school I learned at out there at northwest regional he had much larger problems than the W&B.
 
Back
Top