Lima_Charlie
New Member
So my student are out in the practice area trying to get him ready for his final Multi-engine stagecheck. We are practicing all the manuevers, stalls, steep turns, slow flight, etc, etc.... Finally we get to the single engine manuevers. So I surprise my student w/ a failure and have him got the procedure of trying to fix the engine, and ultimately having to feather the engine. Once feathered, I have my student do a little manuevering on one engine to make sure he can still handle the airplane. After about 10 minutes of this, we decide to unfeather the engine and get on w/ our lesson. So my student pushes the prop lever forward and guess what??!!! NOTHING HAPPENS!!! (For the uninitiated, when the prop lever is pushed forward, oil pressure is to be introduced in to the propeller hub and should thus bring the prop into a position to allow a restart of the engine.) Unfortunately for us, that did not happen. We tried to turn the engine over w/ the starter to see if that would build enough pressure, but it did not work either.
At this point we decided we should probably head back in to the airport. I then give the control tower a call, and declare my first real live emergency. It was kind of surreal, to say the least. I even debated to myself whether declaring and emergency was neccessary, but finally thought, "better safe, than sorry!" So, the tower clears out the airspace, rings up the fire department, and lets me bring it in on the opposite runway.
All in all, it was a very uneventful emergency. Thankfully, we train for this all the time, so it became a non event. It must have been a big deal for those on the ground as about 20-30 people were standing out in front of terminal cheering us on as we taxied by single engine. Lots of "thumbs-up" were sent our way.
Turns out, according to our maintenance depart, that a "low pitch stop" nut had been stripped of its threads, and as a result, would not let the prop move back to its high rpm setting. (Not sure exactly how something like that happens, but it did...)
Moral of the story is... Keep training for those emergencies, so that the day it finally happens, you keep your wits about you and make a nice safe soft landing.
At this point we decided we should probably head back in to the airport. I then give the control tower a call, and declare my first real live emergency. It was kind of surreal, to say the least. I even debated to myself whether declaring and emergency was neccessary, but finally thought, "better safe, than sorry!" So, the tower clears out the airspace, rings up the fire department, and lets me bring it in on the opposite runway.
All in all, it was a very uneventful emergency. Thankfully, we train for this all the time, so it became a non event. It must have been a big deal for those on the ground as about 20-30 people were standing out in front of terminal cheering us on as we taxied by single engine. Lots of "thumbs-up" were sent our way.
Turns out, according to our maintenance depart, that a "low pitch stop" nut had been stripped of its threads, and as a result, would not let the prop move back to its high rpm setting. (Not sure exactly how something like that happens, but it did...)
Moral of the story is... Keep training for those emergencies, so that the day it finally happens, you keep your wits about you and make a nice safe soft landing.