Model airplane builders

BravoHotel

Well-Known Member
I recently ordered a F4F Wildcat.

Can anyone recommend a good paint / building kit that I'll get a lot of mileage out of?
 
Is it a plastic model?

It is a 1:1 scale replica and it is coming on the next barge, included is a Wright Cyclone radial engine...

Yes it is a plastic model, I wondered why I was not getting any replies. Does anyone build plastic models? Since I can't run down to a hobby shop. I thought someone might know of a good solid kit that includes all the paint, glue, hobby knifes you need etc.
 
Yeah, I've always had a store. Problem is paint color can very from bottle to bottle, let alone manufacturers. Plastic cement is the way to go... VERY LITTLE and use a clamp while it dries. If you use a lot it disfigures the model. Best advice, take lots of time. Little things here and there at 10 minutes a piece and let it go. If you want it to be perfect you need to sand the paint down for a second layer. This can help if you have a gap between pieces as well. For dirt, take a piece of sandpaper, dip the tips in spread out paint and then dab on the model. Looks like flecks of mud. Really hard to get perfect. Otherwise dry brush technique for wind blown mud.
 
Welp, I was hoping it was a wood model. I know lots about covering etc. But plastic, I don't know JACK!

You don't know Jack? He is an okay guy, a bit odd at times. I did not even think of starting a wood model, but it sounds like a definite challenge!
 
I have been building model planes for decades and it is a great hobby. You will get the best results in painting by using a hobby airbrush for models. When you see great models, and especially in military camo and colors, they are air brushed/spay painted. It takes a little practice, but the results are just far superior to hand painted models.

You will need a good X-Acto knife for removing the parts of the model from the sprues and for trimming off excess plastic, some very fine sandpaper, some long pointed (not the flat edged slanted type) tweezers for picking up and adhering small parts like struts and windows, Testors glue and a pack of clear plastic glue tips. They are a must. They are conical in shape and fit over the opening of the tube and then taper down so that you can get a tiny amount out of the tube and not waste glue or over glue or create a mess. I think they come like 4 to a pack. You also need filler which comes in a tube, to fit in between the cracks in plastic models as the pieces never seem to fit perfectly and this will take care of filling in any gaps, some rubber bands are good for holding wings and tail pieces and the fuselage together after you glue then and while they dry. Masking tape will work well for masking off areas while painting too. Toothpicks are handy for stirring paint if you go the bottle route. If you don't use an airbrush (and frankly I use an airbrush mostly, and I also use paints in a pen type tube-they are like magic markers and you shake them up and can paint with them-they are great and no mess and easy to use- I get mine at Michaels and I am sure you can buy them on line- I use them for building miniature airport layouts and some models and buildings and the silver they have is excellent for that bare metal look on planes- and you then buff the paint after it dries and shiny it up) get yourself a set of model brushes with varying degrees of bristles. Like some tiny ones for detail work in the cockpit, some with an angle edge, some flat, etc. You can also get a decal clear coat item that comes in a bottle to apply to the decals after you place them on the aircraft to keep them from fading, chipping and peeling.You should also use a setting liquid like Solvaset to apply your decals after soaking them in water. It really makes them stick and you won't have lifting or sliding issues. Oh and there are tiny plastic sticks with a tiny dauber of material on the end to clean up any mistakes (like you got some paint on a windscreen)- just them it in paint thinner and dab the area you want to clean. They come in a pack also and then you can clean them in the thinner and reuse them as well.

If a friend can visit a good hobby store for you and get these items and ship them over to you, that will solve a lot of problems in you trying to get all this stuff yourself online. But you can search the net and find a decent hobby supply company that will most likely have the items and order them. Believe it or not, the best online model shops are the ones in Great Britain. They are crazy for models there and have a lot of European models that you can't get here and all kinds of great supplies and the quality is wonderful. Most of them will also ship anywhere in the world. I have gotten the majority of my WWII models from England.

You can start out using a jumbo size can of compressed air for your tiny air sprayer. Revelle makes them and so do other companies. Eventually, you will love the effects you get from airbrushing that you can buy an inexpensive tiny air compressor to work with your tiny air sprayer. lol That is what I have.

I am not into buying kits for the accessories to build models as they often have things that you do not need and won't have things that you do need. I buy per piece/item. You'll find by trial and error what items you need and what well for you. Then you just stock up on those items and you are good to go and none of them are expensive.

Do a little research on line. There are hobby sites, and a lot of great forums for model plane builders and you can learn a great deal, get ideas, and advice.

It's a terrific hobby, very enjoyable and something you can share with your kids and grand kids at some point in time. It really relaxes you. You'll never be bored and never run out of planes that you want to build. Then you'll get crazy, like me and start building dioramas for your models and runways and tiny buildings, landscaping, vehicles and stuff. Then you'll be buying a Dremel tool and accessories. lol If you have any questions, feel free to pm me or ask here or whatever.

Take a look around Testor's site and you will see many of the accessories that I mentioned:

http://www.testors.com/model_and_hobby
 
I like that so much in fact I printed it.
Cool! I can't wait to hear how the first model goes. Just take your time, get the accessories and stuff that you need and enjoy!!! The Testor's site has most of what you will need in the way of accessories and as you can see, the prices are cheap city.

If I had a buck for every model I have built in my life, I could retire my old ass finally. lmao My oldest son still builds models and we built them together when he was a kid, my Dad and Uncle built models with me as a kid and I build them with my grandson now. Then I got into the Herpa models and buildings and accessories and started building airport layouts. It really becomes a life long hobby. We won't even get into the RC plane thing that I started a few years back. lol
 
It's been a while but I used to. Guillows free flight rubber powered. Ah the hours o enjoyment.


Sent from my iPhone using Tapatalk
 
Does anyone do balsa-wood models anymore?
Some people sure do. There are plenty of die hard purists who also just get plans/blueprints for planes, which you can buy online and then buy the wood and go for it. I have done that with two small boat models (a sloop and a lobster boat) and cripes it took forever, required all kinds of different stains and varnishes and accessories but they came out really good.

I have built some balsa models that I bought ages ago at the Smithsonian. Like the Wright flyer and a couple of others. The kits are harder to find and you have to shop around at a few sites to get a good variety.

Paul Guillow makes some:

http://www.guillow.com/

Mega Hobby has the largest selection that I have seen:

http://www.megahobby.com/balsaairplanes.aspx
 
One thing I and an absolutely model obsessed friend used to do for minute pieces...

Put a drop of glue on about four thicknesses of newspaper (to protect what's underneath), and touch the pieces to the drop. Great glue control. Also spread the glue on the paper with cardboard or a butter knife, and dab or swipe the model piece.

Pics or it didn't happen!
 
How about scale? 1:72 and 1:48 seem to be popular, and 1:144 with some people. Anyone like 1:32 or larger?
 
For assembly I use Tenax 7R or Plastruct (plastruct is nice because the bottle comes with a brush), I hate the Testors tube cement. You'll want thick and thin superglue for gap filling and white glue for windscreens eventually but here's the biggest piece of advice I can give you:

If you've never built models before don't freak out about building a perfect one. Bang it together, paint it, put it on the shelf and start on the next one, add a little bit of craziness at a time.

www.aircraftresourcecenter.com is an excellent modelling website.

There aren't any tool "kits" that are any good, really you'll want a small toolbox, some glue, some sanding sticks in different grits from maybe 800 down to 4000 (get these from a beauty supply place, not a hobby store, they're cheaper and they last longer) , tweezers, small scissors, assorted little dishes (I have a set of crab leg butter dishes, but cooking measuring cups work well too) an X-acto knife set, a lot of number 11 blades, and a little cutter to cut the parts off the runners (never bend them off, always cut).

For paint don't get too wrapped up in "correct" colors or anything like that right away, just go with what looks good. You'll need flat black, zinc chromate, silver or aluminum, whatever exterior colors (for an F4F it's gonna be two shades of blue and a light grey), red, green, and yellow, and perhaps a rust brown and gunmetal. I have good luck with Tamiya paints. Denatured alcohol will thin them and Lacquer thinner for cleanup, someone on Wake ought to have those things. Shell out for some decent brushes, at least a small detail brush, a medium brush and a wide flat tipped brush

That'll get you started, then you can add what you think will help.
 
Back
Top