pavelump said:If you are not given a clearance for a SID or radar vectors and an ODP exists, you must use the ODP.
jrh said:Interesting. I always thought they were just "good operating practice," but not necessarily mandatory.
Not that the Instrument Procedures Handbook isn't authoritative enough, but do you have a FAR and/or AIM reference to go along with this?
seagull said:121 is more restrictive than that as VMC is not an allowable alternative.
As for your #3, you can't very well have a vector absent radar, so not sure what you're saying there.
seagull said:At one time the Ops Specs were pretty different from carrier to carrier, with each POI pretty much doing their own thing. In the early 90s, Jerry Davis, then manager of AFS-400 (now works for Airbus flight safety) created the "New Standard Ops Specs". Now, all airlines start with the essentially same set of Specs, and each can tailor to their needs by applying various standard exemptions which they can apply for.
As for single engine performance, the answer is "no". The ODP is predicated on "all engine" performance. If you lose one, you are NOT guaranteed those gradients (although jets usually would make them). That is the reason for the EODP, and, absent that, it's up to the pilots, which is yet another reason you don't want the "fat, dumb and happy" breed up front.
seagull said:As for single engine performance, the answer is "no". The ODP is predicated on "all engine" performance. If you lose one, you are NOT guaranteed those gradients (although jets usually would make them). That is the reason for the EODP, and, absent that, it's up to the pilots, which is yet another reason you don't want the "fat, dumb and happy" breed up front.
pavelump said:I think the real question here is, "You down with ODP?"
![]()
pavelump said:I think the real question here is, "You down with ODP?"
![]()
cime_sp said:Pavelump....where you at these days? Still playing any music?