I have a question my CFI can't answer...

jspeed87

Well-Known Member
About the Commercial requirements. I decided that I'm going for my initial commercial SEL and adding the CMEL later ( I have my multi-instrument.) I did all of the requirements in a multi and the only thing I need is 50 hours X-country time and 250tt. Since I moved back to NJ, and thus left the academy lifestyle, I have been flying C152's because it's more affordable. Do I need to redo this or do they cancel out for being done in a multi-engine airplane? I haven't heard from my CFI, who was going to call AOPA for a response.
 
About the Commercial requirements. I decided that I'm going for my initial commercial SEL and adding the CMEL later ( I have my multi-instrument.) I did all of the requirements in a multi and the only thing I need is 50 hours X-country time and 250tt. Since I moved back to NJ, and thus left the academy lifestyle, I have been flying C152's because it's more affordable. Do I need to redo this or do they cancel out for being done in a multi-engine airplane? I haven't heard from my CFI, who was going to call AOPA for a response.

You're going to be a commercial pilot, look it up in the regs, and then if you still have questions, come back.
 
You're going to be a commercial pilot, look it up in the regs, and then if you still have questions, come back.

We did that already, but he says it might cancel out. Just like you can fly instruments in a single after you get your multi-instrument but not the other way around.
 
We did that already, but he says it might cancel out. Just like you can fly instruments in a single after you get your multi-instrument but not the other way around.

When in doubt trust the FAR's. As long as your meet 61.129 (a) you're good to go
 
Here is the way I did mine. I used the multi engine as my complex time. Went up in the duchess and did all of the Multi stuff. Then I came back and went up in a warrior and did the commercial manuvers. You already demonstrated the complex portion in the multi. You are actually taking 2 checkrides, a CMAL and CSEL. Look up the requirements in 61.129(a) and (b). you must meet all the requirement for both. Remember though and airplane is an airplane it doesn't distinguish between single and mulit engine, except where it say in a "single engine airplane" or in a "multi engine airplane.

Keith
 
We did that already, but he says it might cancel out. Just like you can fly instruments in a single after you get your multi-instrument but not the other way around.

61.129 Aeronautical experience.

top
(a) For an airplane single-engine rating. Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and single-engine class rating must log at least 250 hours of flight time as a pilot that consists of at least:

(1) 100 hours in powered aircraft, of which 50 hours must be in airplanes.

(2) 100 hours of pilot-in-command flight time, which includes at least—

(i) 50 hours in airplanes; and

(ii) 50 hours in cross-country flight of which at least 10 hours must be in airplanes.

(3) 20 hours of training on the areas of operation listed in §61.127(b)(1) of this part that includes at least—

(i) Ten hours of instrument training using a view-limiting device including attitude instrument flying, partial panel skills, recovery from unusual flight attitudes, and intercepting and tracking navigational systems. Five hours of the 10 hours required on instrument training must be in a single engine airplane;

(ii) 10 hours of training in an airplane that has a retractable landing gear, flaps, and a controllable pitch propeller, or is turbine-powered, or for an applicant seeking a single-engine seaplane rating, 10 hours of training in a seaplane that has flaps and a controllable pitch propeller;

(iii) One 2-hour cross country flight in a single engine airplane in daytime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure;

(iv) One 2-hour cross country flight in a single engine airplane in nighttime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure; and

(v) Three hours in a single-engine airplane with an authorized instructor in preparation for the practical test within the preceding 2 calendar months from the month of the test.

(4) Ten hours of solo flight time in a single engine airplane or 10 hours of flight time performing the duties of pilot in command in a single engine airplane with an authorized instructor on board (either of which may be credited towards the flight time requirement under paragraph (a)(2) of this section), on the areas of operation listed under §61.127(b)(1) that include—

(i) One cross-country flight of not less than 300 nautical miles total distance, with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and

(ii) 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower.
 
61.129 Aeronautical experience.

top
(a) For an airplane single-engine rating. Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and single-engine class rating must log at least 250 hours of flight time as a pilot that consists of at least:

(1) 100 hours in powered aircraft, of which 50 hours must be in airplanes.

(2) 100 hours of pilot-in-command flight time, which includes at least—

(i) 50 hours in airplanes; and

(ii) 50 hours in cross-country flight of which at least 10 hours must be in airplanes.

(3) 20 hours of training on the areas of operation listed in §61.127(b)(1) of this part that includes at least—

(i) Ten hours of instrument training using a view-limiting device including attitude instrument flying, partial panel skills, recovery from unusual flight attitudes, and intercepting and tracking navigational systems. Five hours of the 10 hours required on instrument training must be in a single engine airplane;

(ii) 10 hours of training in an airplane that has a retractable landing gear, flaps, and a controllable pitch propeller, or is turbine-powered, or for an applicant seeking a single-engine seaplane rating, 10 hours of training in a seaplane that has flaps and a controllable pitch propeller;

(iii) One 2-hour cross country flight in a single engine airplane in daytime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure;

(iv) One 2-hour cross country flight in a single engine airplane in nighttime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure; and

(v) Three hours in a single-engine airplane with an authorized instructor in preparation for the practical test within the preceding 2 calendar months from the month of the test.

(4) Ten hours of solo flight time in a single engine airplane or 10 hours of flight time performing the duties of pilot in command in a single engine airplane with an authorized instructor on board (either of which may be credited towards the flight time requirement under paragraph (a)(2) of this section), on the areas of operation listed under §61.127(b)(1) that include—

(i) One cross-country flight of not less than 300 nautical miles total distance, with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and

(ii) 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower.

(b) For an airplane multiengine rating. Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and multiengine class rating must log at least 250 hours of flight time as a pilot that consists of at least:

(1) 100 hours in powered aircraft, of which 50 hours must be in airplanes.

(2) 100 hours of pilot-in-command flight time, which includes at least—

(i) 50 hours in airplanes; and

(ii) 50 hours in cross-country flight of which at least 10 hours must be in airplanes.

(3) 20 hours of training on the areas of operation listed in §61.127(b)(2) of this part that includes at least—

(i) Ten hours of instrument training using a view-limiting device including attitude instrument flying, partial panel skills, recovery from unusual flight attitudes, and intercepting and tracking navigational systems. Five hours of the 10 hours required on instrument training must be in a multiengine airplane;

(ii) 10 hours of training in a multiengine airplane that has a retractable landing gear, flaps, and controllable pitch propellers, or is turbine-powered, or for an applicant seeking a multiengine seaplane rating, 10 hours of training in a multiengine seaplane that has flaps and a controllable pitch propeller;

(iii) One 2-hour cross country flight in a multiengine airplane in daytime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure;

(iv) One 2-hour cross country flight in a multiengine airplane in nighttime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure; and

(v) Three hours in a multiengine airplane with an authorized instructor in preparation for the practical test within the preceding 2 calendar months from the month of the test.

(4) 10 hours of solo flight time in a multiengine airplane or 10 hours of flight time performing the duties of pilot in command in a multiengine airplane with an authorized instructor (either of which may be credited towards the flight time requirement in paragraph (b)(2) of this section), on the areas of operation listed in §61.127(b)(2) of this part that includes at least—

(i) One cross-country flight of not less than 300 nautical miles total distance with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and

(ii) 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight with a traffic pattern) at an airport with an operating control tower.

Ok, I think I get the point, but I'm still confused about this one... 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower. It doesn't say single engine for this but I did this in a multi already with a CFI.
 
Ok, I think I get the point, but I'm still confused about this one... 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower. It doesn't say single engine for this but I did this in a multi already with a CFI.
That must be done in a single and a multi engine airplane.
 
Ok, I think I get the point, but I'm still confused about this one... 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower. It doesn't say single engine for this but I did this in a multi already with a CFI.

That was what I'm trying to get at. A specific question. That shows me (or your CFI) that your looking up questions you have on your own first. Then after not being able to find the answer you come back with a specific question. I would not let my students ask questions like "What is adverse yaw?" That shows me they put no effort into finding the answer themselves. If they came back with a question like "I'm having a problem understanding how differential ailerons work, I understand one goes up more then the other, but why and which one?" I'd have no problem working with them to find the answer.

As for your question, it falls under subpart (4) which has to be done solo in a single engine airplane. You'd have to re-do this category.

I hope you understand the point I was trying to get across, wasn't trying to be a jerk, just gotta give you that tough love.
 
61.129 Aeronautical experience.

top
(a) For an airplane single-engine rating. Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and single-engine class rating must log at least 250 hours of flight time as a pilot that consists of at least:

(1) 100 hours in powered aircraft, of which 50 hours must be in airplanes.

(2) 100 hours of pilot-in-command flight time, which includes at least—

(i) 50 hours in airplanes; and

(ii) 50 hours in cross-country flight of which at least 10 hours must be in airplanes.

(3) 20 hours of training on the areas of operation listed in §61.127(b)(1) of this part that includes at least—

(i) Ten hours of instrument training using a view-limiting device including attitude instrument flying, partial panel skills, recovery from unusual flight attitudes, and intercepting and tracking navigational systems. Five hours of the 10 hours required on instrument training must be in a single engine airplane;

(ii) 10 hours of training in an airplane that has a retractable landing gear, flaps, and a controllable pitch propeller, or is turbine-powered, or for an applicant seeking a single-engine seaplane rating, 10 hours of training in a seaplane that has flaps and a controllable pitch propeller;

(iii) One 2-hour cross country flight in a single engine airplane in daytime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure;

(iv) One 2-hour cross country flight in a single engine airplane in nighttime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure; and

(v) Three hours in a single-engine airplane with an authorized instructor in preparation for the practical test within the preceding 2 calendar months from the month of the test.

(4) Ten hours of solo flight time in a single engine airplane or 10 hours of flight time performing the duties of pilot in command in a single engine airplane with an authorized instructor on board (either of which may be credited towards the flight time requirement under paragraph (a)(2) of this section), on the areas of operation listed under §61.127(b)(1) that include—

(i) One cross-country flight of not less than 300 nautical miles total distance, with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and

(ii) 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower.

(b) For an airplane multiengine rating. Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and multiengine class rating must log at least 250 hours of flight time as a pilot that consists of at least:

(1) 100 hours in powered aircraft, of which 50 hours must be in airplanes.

(2) 100 hours of pilot-in-command flight time, which includes at least—

(i) 50 hours in airplanes; and

(ii) 50 hours in cross-country flight of which at least 10 hours must be in airplanes.

(3) 20 hours of training on the areas of operation listed in §61.127(b)(2) of this part that includes at least—

(i) Ten hours of instrument training using a view-limiting device including attitude instrument flying, partial panel skills, recovery from unusual flight attitudes, and intercepting and tracking navigational systems. Five hours of the 10 hours required on instrument training must be in a multiengine airplane;

(ii) 10 hours of training in a multiengine airplane that has a retractable landing gear, flaps, and controllable pitch propellers, or is turbine-powered, or for an applicant seeking a multiengine seaplane rating, 10 hours of training in a multiengine seaplane that has flaps and a controllable pitch propeller;

(iii) One 2-hour cross country flight in a multiengine airplane in daytime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure;

(iv) One 2-hour cross country flight in a multiengine airplane in nighttime conditions that consists of a total straight-line distance of more than 100 nautical miles from the original point of departure; and

(v) Three hours in a multiengine airplane with an authorized instructor in preparation for the practical test within the preceding 2 calendar months from the month of the test.

(4) 10 hours of solo flight time in a multiengine airplane or 10 hours of flight time performing the duties of pilot in command in a multiengine airplane with an authorized instructor (either of which may be credited towards the flight time requirement in paragraph (b)(2) of this section), on the areas of operation listed in §61.127(b)(2) of this part that includes at least—

(i) One cross-country flight of not less than 300 nautical miles total distance with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and

(ii) 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight with a traffic pattern) at an airport with an operating control tower.



My source is 61.129. See the red text above. Those requirement are under both Single and Multi Engine under supart 4 under both A and B
 

I edited my original post because I copied and pasted to much from the regs. For a CSEL, which is what he's working towards he'd need to re-do the items in a single engine airplane solo, because it falls under subpart (4).

You're copying requirements for both CSEL & CMEL.
 
I edited my original post because I copied and pasted to much from the regs. For a CSEL, which is what he's working towards he'd need to re-do the items in a single engine airplane solo, because it falls under subpart (4).

You're copying requirements for both CSEL & CMEL.


Yes I know I am he was asking what he had to do for the single engine. I highlight both because that is what is needed in each. If he doesn't have them then he must do them to complete the requirement. What I would suggest the he do is since he already has the multi requirement done is to get the single engine requirements done. Then he can take 2 checkrides in the same day. A MEL Commercial and a SEL Commercial. He already has the complex time from the twin so he can do the single engine work in a C150 C172 etc. thus saving him money in the long run because he won't have to rent a complex single. This is what I did and it wasn't any more difficult then doing them different days, and Saved me 10 hours of SEL Complex time.


Had to explain it to the examiner a couple of times. After we did the rides he told me everyone should do it like that.
 
I'm partly confused, and also with you James. You quoted CSEL which is what he's going for. Doesn't matter if it was done in a multi, the regs say single engine. Once he gets the CSEL, the CMEL is an add-on and he does not have to do the landings "for both" as someone stated.
 
Ok, I think I get the point, but I'm still confused about this one... 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower. It doesn't say single engine for this but I did this in a multi already with a CFI.

(4) Ten hours of solo flight time in a single engine airplane ... that include—

(ii) 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower.
 
I'm partly confused, and also with you James. You quoted CSEL which is what he's going for. Doesn't matter if it was done in a multi, the regs say single engine. Once he gets the CSEL, the CMEL is an add-on and he does not have to do the landings "for both" as someone stated.

You're confused with me, or agree w/ me?
 
It seems to me like it would be easier just to do the Commercial Multi as your initial, rather than Commercial Single. If you do Commercial Single as your initial, you will have to redo everything that specifically says "in a single engine airplane" over again. You can't combine them, as KDoersom is suggesting.
 
You can't combine them, as KDoersom is suggesting.

EDIT: Nevermind. I was making a moot point. Half ass reading posts and arguing what are "correct posts." If all you have left to do is 50 XC and 250TT, finish that up in a SEL, then take the CMEL ride. If that's not what you want to do, then you will have to redo everything in the regs that states "single engine." You said you have everything met ME wise. I'd do that first.
 
It seems to me like it would be easier just to do the Commercial Multi as your initial, rather than Commercial Single. If you do Commercial Single as your initial, you will have to redo everything that specifically says "in a single engine airplane" over again. You can't combine them, as KDoersom is suggesting.

That's incorrect. Whichever you do as the initial, there are only certain things that you need to do in the other to add-on the rating. You don't need to do everything all over again. For instance, if you do the CSEL as the initial, you don't need to repeat any of the cross-country flights nor the night take-offs & landings to add on the multi rating just as you don't perform all of the required single engine maneuvers in the multi for the flight test
 
Back
Top