How to become a DPE???

MedicRyan

Well-Known Member
What are the requirements?

How long do you have to be a CFI before you can apply?

Any information would be greatly appreciated!!

Ryan
 
I asked that question to my first instructor. He said what you have to do is get your ATP, then get on the waiting list for about 10 years. Sounds just like becomming an airline pilot if you ask me.
grin.gif
 
I'll try PM'ing John Tenney, aka Mr_Creepy, a link to this thread. I believe he is in line for a DPE position in Florida.
 
To become a DPE there has to be a need as defined by the FSDO for another DPE. An ATP is nice, though not a requirement. I understand that the minimums are 2500 hours and 300 hours in the last year. The 300 hours seems to knock a lot of would be examiners out of the running.

There's a written test which (I believe) you can take whenever you'd like. You present your exam and yourself to the FSDO who then schedules you - at your own expense - to go to OK City for DPE training.

When you get back you have to sit tight until the FSDO says "yep, you'll do" and you can begin to examine. You'll likely have an FAA inspector with you for a while.

As a practical matter, it's best if the FSDO asks you, if you're an ASC, and if another examiner (or two) recommend you.

This is from an examiner buddy of mine, and he's been around a while, so it may be out of date.

-LC
 
One of the instructors at my school just did his CFII checkride with a DPE. The DPE had an upcomming checkride with the inspector that did this instructors initial CFI. Throughout the whole checkride the DPE was digging for gouge. I though that was hilarious to hear that the examiner was getting gouge from the examinee.
grin.gif
 
i also heard you had to be a chief pilot or assistant chief for a period of time. not sure at what kind of outfit though
 
[ QUOTE ]
What are the requirements?

How long do you have to be a CFI before you can apply?

Any information would be greatly appreciated!!

Ryan

[/ QUOTE ]

The info is in the Pilot Examiner's Handbook, here's a link to the section that applies to your question. (PDF format - page 5)

You may have to copy the link and paste it as clicking from here seems to be hit or miss.

http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgOrders.nsf/0/7f85cd99697aa59d86256f700076ed32/$FILE/87103D-C02.pdf
 
You also have to wait till someone dies or retires to get a slot the FSDO for that region will only keep a certain amount of DPE's for their respective region, so they wont bicth to much.

The DPE's are like a frat if you piss them off you are blackballed.
 
[ QUOTE ]
To become a DPE there has to be a need as defined by the FSDO for another DPE. An ATP is nice, though not a requirement. I understand that the minimums are 2500 hours and 300 hours in the last year. The 300 hours seems to knock a lot of would be examiners out of the running.

There's a written test which (I believe) you can take whenever you'd like. You present your exam and yourself to the FSDO who then schedules you - at your own expense - to go to OK City for DPE training.

When you get back you have to sit tight until the FSDO says "yep, you'll do" and you can begin to examine. You'll likely have an FAA inspector with you for a while.

As a practical matter, it's best if the FSDO asks you, if you're an ASC, and if another examiner (or two) recommend you.

This is from an examiner buddy of mine, and he's been around a while, so it may be out of date.

-LC

[/ QUOTE ]

yeahthat.gif
 
Back
Top