flyingmedic
Well-Known Member
This was purchased for me by my wife last Christmas. It was never installed. It's been sitting in my basement for a year, and it's time for a new home.
Still in the sealed JPI box!
Price is $3500.00 + shipping/insurance of your choosing. Reasonable offers will be entertained
JPI has this unit listed at $4510.00 You can figure 20-25 Hours install time ( that's based on several quotes obtained within last 30 days. It would be considerably less if you have the ability to run the probes yourself...that's 90% of the labor.)
THIS IS THE NEW TSO'D JPI EDM-830 ENGINE MANAGEMENT SYSTEM FOR UP TO 6 CYLINDER WITH %HP/FF/OAT/MAP/RPM/OIL TEMP/ AND OIL PRESS.
ALL THE PROBES, WIRING HARNESS ARE ALL NEW.
COMES COMPLETE WITH ALL THE ABOVE AS WELL AS THE INDICATOR, PILOTS GUIDES, INSTALLATION MANUAL, AND THE 1-GB MEMORY STICK FOR DATA.
THE EDM-830 FUNCTIONS:
6-EGT PROBES
6-CHT PROBES
VOLTS
SHOCK COOLING
LOP/ROP JPI EXCLUSIVE LEANING MODE
FUEL FLOW ( USED, REMAINING, GPH, ENDURANCE, GPS DESTINATION)
RPM SENSOR FOR BENDIX MAGNETO
MAP
OIL TEMP
OIL PRESS
OAT
%HP
FUEL TRANSDUCER (FOR INJECTED ENGINES)
POWER CONNECTOR
ALL REQUIRED HARNESS
EZTRENDS DATA PROGRAM
DATA RECORDING-100 HOURS. DOWNLOAD USB
1 GB MEMORY STICK
SELECTABLE POSITIONS FOR LINEAR GAUGES
ALSO SEE MORE HERE http://www.jpinstruments.com/shop/edm-830/
REMAINING BALANCE OF MANUFACTURER 3 YEAR WARRANTY (12/2011 purchase date...1 year on the probes, 3 years on everything else.)
Feel free to Call/Text (732)500-8209
Or
Email billgolden@gmail.com
Thanks...
Bill
Still in the sealed JPI box!
Price is $3500.00 + shipping/insurance of your choosing. Reasonable offers will be entertained
JPI has this unit listed at $4510.00 You can figure 20-25 Hours install time ( that's based on several quotes obtained within last 30 days. It would be considerably less if you have the ability to run the probes yourself...that's 90% of the labor.)
THIS IS THE NEW TSO'D JPI EDM-830 ENGINE MANAGEMENT SYSTEM FOR UP TO 6 CYLINDER WITH %HP/FF/OAT/MAP/RPM/OIL TEMP/ AND OIL PRESS.
ALL THE PROBES, WIRING HARNESS ARE ALL NEW.
COMES COMPLETE WITH ALL THE ABOVE AS WELL AS THE INDICATOR, PILOTS GUIDES, INSTALLATION MANUAL, AND THE 1-GB MEMORY STICK FOR DATA.
THE EDM-830 FUNCTIONS:
6-EGT PROBES
6-CHT PROBES
VOLTS
SHOCK COOLING
LOP/ROP JPI EXCLUSIVE LEANING MODE
FUEL FLOW ( USED, REMAINING, GPH, ENDURANCE, GPS DESTINATION)
RPM SENSOR FOR BENDIX MAGNETO
MAP
OIL TEMP
OIL PRESS
OAT
%HP
FUEL TRANSDUCER (FOR INJECTED ENGINES)
POWER CONNECTOR
ALL REQUIRED HARNESS
EZTRENDS DATA PROGRAM
DATA RECORDING-100 HOURS. DOWNLOAD USB
1 GB MEMORY STICK
SELECTABLE POSITIONS FOR LINEAR GAUGES
ALSO SEE MORE HERE http://www.jpinstruments.com/shop/edm-830/
REMAINING BALANCE OF MANUFACTURER 3 YEAR WARRANTY (12/2011 purchase date...1 year on the probes, 3 years on everything else.)
Feel free to Call/Text (732)500-8209
Or
Email billgolden@gmail.com
Thanks...
Bill
