Diesel 182

Pshhh, I've done 12 hour days in an old O-470 1960's somethign 182. I've done a couple of 14 hours days in a old 172, so have a few people on here I worked with. We had a guy get over 200 hours in one month in a 172. That included down days for 100 hours. UAL747400 knows what I'm talking about.

Psh, I did 226. They guy you're talking about did 240! That's CRAZY! haha

That never bothered me if it was a relocation flight. I always liked the anticipation of a new city to explore and sometimes, the 1000-3000 mile journey was quite interesting as well.

However, 14 hours of flying about 30 miles NW of El Paso, TX, back and forth back and forth, just about made me want to scratch out my brain!!! :bang:
 
From what I know about diesels, it's particularly difficult to get a high amount of horsepower out of the engine. Diesels are much better at high torque applications.

Given the RPM range, I'd say that's right in the meat of the torque curve for that displacement. The horsepower will be less, yes, but I but it'll turn a bigger/higher pitch prop. In my mind at least...;)
 
I have a 2-tank WVO system on my '85 BMW 524td and it runs great on 100% waste veggie oil. But I am definitely not hippie! :)

Post on here more!!! Especially car stuff. MOAR threads need to be derailed with car stuff, particularly, the UND section! :D
 
Death to 100LL.... long live Diesel!

I'd run mine on leftover donut fryer grease, like all those metro-pseudo-hippies driving around 1980's diesel Mercedes.... it'd make everyone around the airport hungry all the time and then I'd open a donut shop across the street and get rich feeding their cravings.

Diesel is the fuel of satan, so yes, we need to burn more of it!
 
Given the RPM range, I'd say that's right in the meat of the torque curve for that displacement. The horsepower will be less, yes, but I but it'll turn a bigger/higher pitch prop. In my mind at least...;)
Which given the application - twisting a prop, I could give a crap less how much HP the engine has as long as it can maintain RPM. MOAR TORK! GO FASTER!
 
Torque would definitely be useful in turning an engine for an extended period of time. Diesels are excellent at longevity of torque production. Think in terms of generators and ships. And trains.
 
When is someone going to build a 300hp diesel engine? Continental has supposedly been working on one for forever it seems. A new plane is nice, but I'd much rather see an STC'd 300hp+ Jet A burning engine. The 206 I fly costs over $200/hour for avgas, with its operating cost per mile approaching that of the 208. That's why $80k for a diesel engine would be FAR more cost effective than a comparable $40k avgas engine.

You are saying your 206 burns 29 GPH with seven dollar gas is the tanks?
 
Which given the application - twisting a prop, I could give a crap less how much HP the engine has as long as it can maintain RPM. MOAR TORK! GO FASTER!
Well, by the definition of horsepower, to overcome the same prop drag at the same RPM requires the same horsepower, so I'm not quite sure why you think that total power doesn't matter..
 
The 206 I fly costs over $200/hour for avgas, with its operating cost per mile approaching that of the 208.

What kind of 206 are you flying??? Even at $7 a gallon with a high fuel burn of 18gph, that's only $126. How much is fuel where you are at and what sort of fuel burn do you normally get?

Edit to Add: Yeah, what Douglas said.
 
Well, by the definition of horsepower, to overcome the same prop drag at the same RPM requires the same horsepower, so I'm not quite sure why you think that total power doesn't matter..

I'm guessing he meant that making 230bhp at 2200RPM is better than making it at 2700RPM. More thrust, more efficient propellering.
 
Well, by the definition of horsepower, to overcome the same prop drag at the same RPM requires the same horsepower, so I'm not quite sure why you think that total power doesn't matter..
The point of high torque is that you don't need blisteringly high RPM to do the same amount of work.
 
That's Merlin's Magic, isn't it? That was a rough week for them!

That it was, that happened early on and then later in the week they blew the airplane in half. Luckily no one was hurt and the airplane was put back together.



Sent from 1865 by telegraph....
 
You are saying your 206 burns 29 GPH with seven dollar gas is the tanks?

No, you are assuming we pay $7/gallon for avgas. Here's the thing: if you're in the US, this whole diesel engine thing may seem kind of superfluous, but if you're outside the US, it literally determines whether you can even operate sometimes. FYI, we pay over $12/gallon for avgas where I am in Indonesia, and you have to order it by the ISO tank (about 115 drums). There's no where in the entire country where you can pull up and just say "filler' up." Jet A is easily available though, and about 1/3 the cost of avgas.
 
Yes, and there's already an SMA 182 (STC'd), just like there was an STC'd turbo Cirrus (the Tornado Alley Turbonormalized IO-550-N) before Cirrus came out with a factory TC'd Cirrus.
My point here was specific to Cessna products. That the Theilerts are widely used on the 172 but not in the US. Cassna seems to be playing catch up with the other manufacturers
 
I'm guessing he meant that making 230bhp at 2200RPM is better than making it at 2700RPM. More thrust, more efficient propellering.
Interesting point. However, if you're turning the prop at only 2200 RPM (and I realize that's just an arbitrary RPM you threw out), that means you're going to need a longer prop. Ground clearance could become a real issue for many planes if that's the case.
 
My point here was specific to Cessna products. That the Theilerts are widely used on the 172 but not in the US. Cassna seems to be playing catch up with the other manufacturers
I hear ya. My point was simply that Cirrus did exactly the same thing Cessna did. Someone offers an STC'd engine, then the manufacturer (Cessna and Cirrus in this case) sees that it's popular or worthwhile, so they begin offering a factory original option. I guess I don't see that it's that unusual, especially in Cessna's case, since there's not a huge demand for diesel engines in the US.
 
Back
Top