~900 Hour pilot needs 100 XC and 25 Multi

Jamesah2008

Well-Known Member
I'm looking for an honest way to get another 100 XC. Safety pilot's can't log PIC so that idea is out. I'm trying to drum up work in Houston but if anyone has a lead on something that might net me some XC time that would be great. I'm fresh out of Ft. Rucker looking to get the rest of my FW time to go see if I like airline life.

CFI ASEL. CFII check ride scheduled for the end of the week. Multi-engine next week.

Please PM me here and I can get you a resume'
 
Safety pilot can log PIC. Both pilots can't log cross country because the takeoff and landing only require one pilot. But the whole time the foggles are on both can log PIC.

http://www.aopa.org/Pilot-Resources...Report-Logging-Pilot-in-Command-PIC-Time.aspx

"When practicing flying in simulated instrument conditions with a safety pilot, both the pilot flying the aircraft by reference to instruments and the safety pilot may log PIC time if the safety pilot is acting as PIC. As long as the pilot flying the aircraft is rated for the aircraft being flown, he/she may log this time as PIC because he/she is sole manipulator of the controls (FAR 61.51). Because the pilot flying will be wearing a view-limiting device, a safety pilot will be a required crewmember on board (FAR 91.109). The safety pilot may log as PIC any flight time for which he/she is acting PIC in an operation requiring more than one pilot crewmember (FAR 61.51)."
 
Last edited:
Plus, if you're a CFI you can log it as instruction given and PIC. Shouldn't be an issue.
 
I'm looking for an honest way to get another 100 XC. Safety pilot's can't log PIC so that idea is out. I'm trying to drum up work in Houston but if anyone has a lead on something that might net me some XC time that would be great. I'm fresh out of Ft. Rucker looking to get the rest of my FW time to go see if I like airline life.

CFI ASEL. CFII check ride scheduled for the end of the week. Multi-engine next week.

Please PM me here and I can get you a resume'

You could go do a season of Picto Mapping and likely make more than you are now. The interview process starts in the coming weeks and you'd have no problem getting the CC and ATP minimums over the course of a season. That said with 900 hours you could have your pick of work from a few other survey companies. There's plenty of information on Pictometry here if you look for it. Since you're already in Texas you could also look at Keystone which has a Tyler office and I believe is looking for pilots too.
 
I feel a little silly for saying PIC. I meant XC time. Being a CFI, I guess I could certainly do some dual along the way. I have thought about aerial pictometry. I will take a look around and see what I can come up with.
 
I feel a little silly for saying PIC. I meant XC time. Being a CFI, I guess I could certainly do some dual along the way. I have thought about aerial pictometry. I will take a look around and see what I can come up with.

Hey James, I guess another guy beat me to it, but aerial survey is a great way to get cross country time. I started the second week of June at SkyLens and have gotten something like 170 hours total with 127 being cross country (the 50 nm rule is a big help). Our regular season will start up at the beginning of October so now's the time to get your stuff in. There's an Aztec or two coming on line this next season, so there's multi time to be had as well. The only potential wrench is juggling your drill weekends since in this business, once you're out on the road for a shooting season, you're on the road and committed to fly if the weather is shootable. Anyways, good luck on the CFII ride and try not to break the Baron!
 
Last edited:
So how is a CFI supposed to log XC?

Part 61 allows logging of PIC while acting as an authorized instructor. So in your situation you could fly with another pilot, who is under the hood or not, on a XC where they are sole manipulator of the controls and both log the time as PIC. Just remember some circumstances require the instruction be documented. A simple note on the flight in the other pilots log book as well as your own meets the requirement in most circumstances.

Also, remember ATP XC requirements are 50nm no landing needed. A 50nm out and back with the takeoff and landing at the same airport is loggable as XC. I think this is for the P3 guys.

Rotorcraft requirement is only 25nm but you need a landing.
 
Part 61 allows logging of PIC while acting as an authorized instructor. So in your situation you could fly with another pilot, who is under the hood or not, on a XC where they are sole manipulator of the controls and both log the time as PIC. Just remember some circumstances require the instruction be documented. A simple note on the flight in the other pilots log book as well as your own meets the requirement in most circumstances.

Part 61 also allows for logging of PIC while acting as a safety pilot. If you're on the plane and legally logging the flight time, you can log every part of that flight, except the landings, because the only thing the regs specifically state that can only be logged as sole manipulator are the landings. Everything else is fair game, and to not log it, and to advise others also not to log it, you are A- shorting yourself and B creatively interpreting the regs much more strictly than they are written.
 
Part 61 also allows for logging of PIC while acting as a safety pilot. If you're on the plane and legally logging the flight time, you can log every part of that flight, except the landings, because the only thing the regs specifically state that can only be logged as sole manipulator are the landings. Everything else is fair game, and to not log it, and to advise others also not to log it, you are A- shorting yourself and B creatively interpreting the regs much more strictly than they are written.

Could you clarify? I think we are are misunderstanding each other. (see post #2)
We have already established safety pilots could log PIC for the time they are acting as a required crewmember. Are you saying the safety pilot can also log PIC time for the takeoff without being a required crewmember?
 
I'm saying the safety pilot can log the cross-country time as well.

FAR 61.1: Cross-country time means—

(i) Except as provided in paragraphs (ii) through (vi) of this definition, time acquired during flight—

(A) Conducted by a person who holds a pilot certificate;

(B) Conducted in an aircraft;

(C) That includes a landing at a point other than the point of departure; and

(D) That involves the use of dead reckoning, pilotage, electronic navigation aids, radio aids, or other navigation systems to navigate to the landing point.

All of these requirements are met as a safety pilot. It does not anywhere say that the pilot manipulating the controls during the landing is the only pilot able to log the cross-country time.
 
I'm saying the safety pilot can log the cross-country time as well.

FAR 61.1: Cross-country time means...

All of these requirements are met as a safety pilot. It does not anywhere say that the pilot manipulating the controls during the landing is the only pilot able to log the cross-country time.

Oh I see.

You need this:
http://www.faa.gov/about/office_org...009/gebhart - (2009) legal interpretation.pdf

Unless there is a more recent interpretation by The Office of the Chief Counsel of The FAA I am not aware of, logging X-C is as I said.
 
Back
Top