Arrows on a sec chart?

mooneyguy

been around forever
Ok, I know what the legend says, but I'm still trying to figure out what exactly these arrows represent. Look at the attached image of a section. Just off the ABQ 316 radial (airway) next to "awash" there are two crossing arrows. Does someone have a better explaination then what the legend says?
Thank You



http://images.google.com/imgres?imgurl=http://www.bruceair.com/x-c_flights/kapa-kvgt/images/KAEG-500px.jpg&imgrefurl=http://www.bruceair.com/x-c_flights/xc_flights.htm&h=439&w=500&sz=244&hl=en&start=36&tbnid=CfY3E8zWNZzGrM:&tbnh=114&tbnw=130&prev=/images%3Fq%3Dsectional%2Bcharts%26start%3D21%26gbv%3D2%26ndsp%3D21%26hl%3Den%26sa%3DN
 
The arrows show where the AWASH intersection is.

It's the intercection of the 316 radial of ABQ VOR and the 238 radial of the SAF VOR. I looked at the low-enroute chart to determine the radial off of SAF. You would have to use your plotter to figure it out on the sectional.
 
The arrows show where the AWASH intersection is.

It's the intercection of the 316 radial of ABQ VOR and the 238 radial of the SAF VOR. I looked at the low-enroute chart to determine the radial off of SAF. You would have to use your plotter to figure it out on the sectional.

Wow, I should have known that. I guess its been awhile since I have thought about the IFR stuff. Im burning to many brain cells studying for the commercial.
Thanks!
 
Back
Top