knot4u
Repeat Offender
Honor among thieves?Cats are only getting yoinked by the meth zombies at short term. The employee lot has a lot of super sketchy stuff going on around it but never in it.
Sent from my iPhone using Tapatalk
Honor among thieves?Cats are only getting yoinked by the meth zombies at short term. The employee lot has a lot of super sketchy stuff going on around it but never in it.
Sent from my iPhone using Tapatalk
Honor among thieves?
I'm confused. If your wagon is the family car but you park it at the airport when you're away what does your family use when you're absent? Not trying to bust balls, just wondering.
Cats are only getting yoinked by the meth zombies at short term. The employee lot has a lot of super sketchy stuff going on around it but never in it.
Sent from my iPhone using Tapatalk
Thats good to know actually. Who knows, maybe I will take the other ride for a day trip in the summer sometime![]()
My wife has her own car that we mostly use as the family vehicle. But the kids do occasionally ride in mine, and all it takes is a few hours for there to be crumbs in every possible location.
Two planes touched during pushback on the JB ramp......Almost the same as two planes colliding at 150mph on the runway.
The amount of time it takes for two kids under 10 to jack up the back seat of a car is absurdly short.
Two planes touched during pushback on the JB ramp......Almost the same as two planes colliding at 150mph on the runway.
Can they MEL the static wick? Let's go back to the gate and figure it out, seems like a pretty solid plan. Static wicks are important and although their primary purpose is to reduce radio noise, they also provide, in the event of a lightning strike, an exit path for that energy. I've worked on a few jets after they were hit pretty hard by lightning and the static wicks were just sacrificial lambs compared to the other damage to the flight controls but the airplanes all kept flying and landed safely. They seem like an annoying little protuberance but safety and quality is always in the details.Hey they may have lost a static wick here. That’s way more damage than the abort.
Can they MEL the static wick?
I will relate a story your post somehow managed to dislodge from the memory banks. When I was a freshly certified A/P there was not really any opportunities for someone with no actual experience but my instructors had all thought very highly of me as I went through their program, they all knew I was working full time after school as a line guy and I graduated their program with a 4.1 GPA (yes I'd do extracurricular things to boost my average) and they appreciated my dedication. One of them basically handed me a job up at Santa Paula working on small airplanes and because I had a 1984 Toyota truck that I had absolute faith in I took the job regardless of the daily 63 mile commute each way. Santa Paula is a special place, Steve McQueen used to hang out there to relax, I don't know if they're still there but some of the T-hangars had been modified with basically apartments built on the roof, and you never knew what you might see or who you might meet, I was on a first name basis with Mira Slovak (look that name up young people). Anyways, on my first day one of the locals brought in his 185, he was a well known stunt pilot and aerial coordinator (I wish I remembered his name, he's one of the many people that try to stay under the radar while also making movies). I think he needed the rotating beacon assembly on the top of the vertical to be replaced. I was proudly introduced to the customer by my new boss as he said people like me were the best of what A/P schools were producing. He and the customer watched as I set up a ladder, grabbed a cordless drill motor and started drilling rivets to remove whatever it was (time makes things fuzzy). Problem was I'd never experienced a Cherry rivet in real life up to that point, I thought they were like pop rivets. They're not like pop rivets. I don't know if when the customer had his absolutely pristine 185 restored he or maybe whoever did the work they decided to use those rivets but as my new boss and his good customer proudly watched the drill bit hit the stainless core of the rivet and proceeded to make an unexpected left turn and a very precise set of spirals on the vertical before I backed off, I was standing on a ladder after all and had no real idea what I was doing. That was my first day as an A/P. I was not fired and I learned plenty working there afterwards. I think intention is important when a person scratches an airplane, was it careless or negligent, or just ignorance? I was ignorant, but apparently I had potential.Someone broke the first rule (of 5) of a successful aviation career: Don’t scratch the paint.