Jebus! WTF! Looks like the guy flew directly into the bridge. You'd think a 30K hour pilot would know better. Wonder if he had a medical issue or something prevented him from taking corrective action. A Seaplane will slow down pretty quick if you just chop the throttle.
Pilot had been flying for 46 years, one would think he would know the fundamentals of takeoff
How much time in type did he have, how much seaplane time did he have, and how at how many hours do you become immune to directional control issues?
It's designed to disengage with aft elevator input.That video-gif appeared to be lack of rudder input, or relaxation of rudder input. The caravan does have a rudder gust lock... It wouldn't be the first perfectly good airplane & pilot to forget the control lock.
Sent from my iPhone using Tapatalk
Not likely. Most airline pilots don't have the slightest clue about small airplanes or GA. Floats? Hahahahaha!All true, but you would think someone with that many hours would at least know the limits of the take off roll (er float?). If your that close you should know to abort the take off.
Yup. Jet jockies forget about those thing on the floor.Not likely. Most airline pilots don't have the slightest clue about small airplanes or GA. Floats? Hahahahaha!
Hell, the vast majority that I work with are scared to death at the thought of going up in a single. I took a large turbo-prop pilot up yesterday and the footwork was so lacking, I had to take the landing. Skidding turns to final and whatnot(not intentional, you just have to use rudders to turn). We went and did some air work after that and it eventually came back, but in my experience, this seems normal.
I took a large turbo-prop pilot up yesterday and the footwork was so lacking, .
Maybe they just don't want to fly with youNot likely. Most airline pilots don't have the slightest clue about small airplanes or GA. Floats? Hahahahaha!
Hell, the vast majority that I work with are scared to death at the thought of going up in a single. I took a large turbo-prop pilot up yesterday and the footwork was so lacking, I had to take the landing. Skidding turns to final and whatnot(not intentional, you just have to use rudders to turn). We went and did some air work after that and it eventually came back, but in my experience, this seems normal.
Nah, other than the landing gear and the wing carry through most of the airplane is just .032" aluminum.On another note, the Chinese sure know how to build strong bridges.
It's pretty hard to tell but in the .gif on the link in the OP it doesn't look like the rudder is moving. So maybe there will turn out to be something to that speculation.It's designed to disengage with aft elevator input.