Question for a Tower Controller

Today, and three times prior when getting a class D transition south to north through MGE (Dobbins ARB in Atlanta, on the left here), I was level at 3500msl and needed to pass south to north through their airspace. Controller asked me to say altitude, I responded, and he said "sir you're above my airspace, no traffic observed between you and the field, frequency change approved".

Do your class D ceilings differ from what's on the sectional?

Thanks in advance. I was confused as hell.
Screen Shot 2015-06-17 at 21.05.13.png
 
Not a tower controller, but this could be a one foot thing. I feel like this is a one foot thing.
 
As an Atlanta TRACON controller who works that airspace, as long as you're communicating with us we are allowed to run you through there at 3000. If you were talking to Dobbins tower then they should have talked with you. If I'm speaking to you, I usually call MGE and point you out to them so you can descend through their D.
 
As an Atlanta TRACON controller who works that airspace, as long as you're communicating with us we are allowed to run you through there at 3000. If you were talking to Dobbins tower then they should have talked with you. If I'm speaking to you, I usually call MGE and point you out to them so you can descend through their D.
Excellent; that makes sense. I've experienced that with flight following on Atlanta approach KRMG to KPDK ceilings 2500 OVC and had my student request a frequency change so I could stay VFR and grab a class D transition through RYY, and the approach controller said, "nah just stick with me at 3000 on your current heading". Sweet.
 
Some tower facilities seem to have LOAs with a TRACON that give some of their Class D away above a certain altitude, but they expect you to know that even though it's not published on a chart available to pilots.
 
Back
Top