Adding Multi Course

comstsa

Well-Known Member
I could use some help here guys. I work for a new flight school and my boss asked me to come up with some numbers and pricing for adding a Multi to our fleet and developing a course for it. I remember reading an article some time ago that most flight schools are lucky to break even when it comes to Multi training. I'm really hoping that we are able to do this (because I want to fly something other than a 172) but I dont want to sugar coat it and make it look like its going to be profitable to our company. I came here to the threads first before starting my own research because I figured I would get some quicker replys and your thoughts will kind of guide me. I need info on both part 61 and part 141 training, the training hours required, best models for training, their fuel burn and maintenance costs, a fair market price for the course, and any other wise thoughts or suggestions that I may not consider. Thanks!
 
The geographical area will determine fair market price. Since there is no hourly requirement for a private or commercial addon, you will have to determine the package you are comfortable with. There is a defuct operator at our airport who used to do barebones multi engine ratings in TravelAirs for a fixed price. For a CMEL initial, you can do it in 20 hours. We rarely have anyone go over 20 hours.

The Seminoles have been tried and true. They are the 172 of light twins. I have seen places operate all types of aircraft as trainers, some are better than others. Can't really go wrong with a Duchess or Seminole, IMO. If you go with someone ancient like an Apache, there are going to be MX issues.
 
I remember reading an article some time ago that most flight schools are lucky to break even when it comes to Multi training.


I think it is near impossible for a complex single to break even, multi even worse. It would probably need to fly 70+ hours/month to be competitive, which is a lot of multi add-ons....

The average twin trainer around here rents for what a 206 or Saratoga fetches, but with probably twice the costs.
 
I think it is near impossible for a complex single to break even, multi even worse. It would probably need to fly 70+ hours/month to be competitive, which is a lot of multi add-ons....

The average twin trainer around here rents for what a 206 or Saratoga fetches, but with probably twice the costs.


I don't know, our club mooney actually makes money at $95 wet. We almost lowered the price this year but figured no one would fly the C177 which is the same price ( artificially high to recoup cost of the seat track AD).
 
I don't know, our club mooney actually makes money at $95 wet. We almost lowered the price this year but figured no one would fly the C177 which is the same price ( artificially high to recoup cost of the seat track AD).

sweet genius, what were you doing to the seat rails to appreciably jack up the rental cost?
 
AD came out to replace the rails. Total cost was nearly 10k with the floor mod required.

weird. No Cessna I've ever worked on required any modification to the floor to replace the rails and most rails could be done in a half day by someone who'd done a few. Now I'm curious.
 
Damage was found during the seat rail required inspection.

Should be associated with this one: 2011-10-09, but the was an older one before this one
 
Damage was found during the seat rail required inspection.

Should be associated with this one: 2011-10-09, but the was an older one before this one

Seems to be our biggest hangar queen. Pilots door handle snapped, radio 1 likes going out a lot, panel lights are stuck dim most of the time, PTT fails intermittent. No one seems to fly it unless the Mooney is gone or they are taking someone out on a sightseeing trip.

172 just got a new prop and 160hp engine so its popular again.

Anyway, original point is, though we do have some folks that chip in with the MX and as a whole tend to fuel at cheaper locations to keep costs down, we charge what could be considered an awesome rate for a Mooney,yet still make a few bucks an hour after operating costs, and that's not slipping in our low monthly $39, or buy in $750.

Heck Patrick is running that Twinkie south of us and apparently doing well at $199 wet as its been that rate forever, cheaper with block even.

There has to be a way to not lose your pants and provide a twin or complex single at a reasonable rate.
 
weird. No Cessna I've ever worked on required any modification to the floor to replace the rails and most rails could be done in a half day by someone who'd done a few. Now I'm curious.

Didn`t they just came up with an AD for the front seats of the 206, something to do with the locking system on the rail?
 
3 times fuel burn plus labor.
Get a Twin Comanche and don't die because they are touchy around Vmc.


How hard is it to come by parts for a Twin Comanche? I knew a guy with a PA-24-250 and his annuals were getting expensive and long due to hard to find/expensive parts.
 
weird. No Cessna I've ever worked on required any modification to the floor to replace the rails and most rails could be done in a half day by someone who'd done a few. Now I'm curious.

Ouch, that is quite an AD. I guess it factors into airframe resulting in the high cost....just a loose guess. I know if you bust a door your looking at $15,000.
 
Ouch, that is quite an AD. I guess it factors into airframe resulting in the high cost....just a loose guess. I know if you bust a door your looking at $15,000.
Eh, not really. We do seat rails on cessnas every few years in what is a severe usage environment compared to the average flight school. The rails themselves are only 300-400 a piece from McFarlane because there is such a high demand. They recently revised the AD to cover the seat feet as well, all ours are good for the moment but right now the foot parts are mucho dinero because McFarlane hasn't gotten PMA for them yet. As soon as they start competing with Cessna on those parts I expect the price to drop.

It's really not that bad of an AD.
 
Eh, not really. We do seat rails on cessnas every few years in what is a severe usage environment compared to the average flight school. The rails themselves are only 300-400 a piece from McFarlane because there is such a high demand. They recently revised the AD to cover the seat feet as well, all ours are good for the moment but right now the foot parts are mucho dinero because McFarlane hasn't gotten PMA for them yet. As soon as they start competing with Cessna on those parts I expect the price to drop.

It's really not that bad of an AD.

Makes sense, I was thinking it was a 177 specific thing that brought along a nice price tag with it. My guess was an out of production part re-manufacture. I remember an AD that was complied with in the one I was flying in 2011, I believe that was the seat though.
 
Back
Top