Tri-Pacer

  • Thread starter Thread starter Roger, Roger
  • Start date Start date
R

Roger, Roger

Guest
Been flying one a bit lately and kinda having fun with it. Anyone else flown the venerable Flying Milk Stool, or it's more elegant predecessor, the Pacer? Thoughts? Tips? Epithets?
 
Been flying one a bit lately and kinda having fun with it. Anyone else flown the venerable Flying Milk Stool, or it's more elegant predecessor, the Pacer? Thoughts? Tips? Epithets?

I only have one hour in a Tri-Pacer. I was surprised at what terrible glide performance it had. Light on the controls, yet not very graceful.

Still, cool to say you've flown one.
 
Glide performance is, indeed, brick-like. Other quirks: fairly stiff aileron-rudder interconnect, horrendous brakes (handbrake only, drums), and flaps so ineffective one wonders why Piper even bothered. But, it'll lift 4 people and 2 hours worth of gas and they a dirt cheap to own/operate. A pimped out Pacer (with the wheel on the correct end) would be a fun machine, me thinks.
 
A pimped out Pacer (with the wheel on the correct end) would be a fun machine, me thinks.

I was gonna say, aren't they worth more if you hack the nose wheel off? I thought I remembered reading a lot of people have done the conventional gear conversion on their Tri-Pacers. Definitely a cool little airplane, I've seen them in person but haven't had the pleasure of flying one.
 
My opinion is that the Pacer/Tri-Pacer represent one of the best values in airplanes. Compare performance and cost to a same-year C172 and I think the Pacer/Tri-Pacer will win almost any cost/benefit analysis. People will shy away from the fabric covering, but I personally like that you can hack off the covering, look at the skeleton and replace relatively simply. Certainly simpler than re-skinning a !70/172. The glide performance actually makes it somewhat good practice for a Howard DGA (not altogether dissimilar in that manner) and the short coupling (distance between main gear and tailwheel on the Pacer) will have some people wetting their pants but a Pacer isn't exactly a lunch-eater by any means - it'll just do what you tell it. Jim Younkin has a much modified Pacer that will outperform a stock Pacer and he is such an incredibly good guy he lets people closely examine his machine so they can replicate the changes.

Other really great values I perceive are Stinson 108's, Luscombe's, and some of the homebuilt Cub clones (Wag Aero in particular) - you could buy a new Cub fuse that is beefed-up like a clipped Cub, get some clipped-Tcraft wings and pop a 150hp Lycoming on the machine and have a really nice aerobatic/fun machine (this is my current plan). Also, in terms of value, Waco's are incredible - no matter how much they cost. They just kick ass so hard that even if you are spending upwards of $250k for a pristine F-2 you are getting a bargain.
 
Affordable classic these days. I've seen some really well restored examples. I know the pacer is more popular and thus the conversions bring a little more dough, but I kinda think that it'd be a crime to hack up too many of them.
 
Affordable classic these days. I've seen some really well restored examples. I know the pacer is more popular and thus the conversions bring a little more dough, but I kinda think that it'd be a crime NOT to hack up too many of them.

Went ahead and fixed it for you - I will sometimes drop a word now and then too. You can thank me later.
 
Only experience I have is in a "converted" Tri-Pacer. The only thing I did not like was the bungy interlock thingy between the yoke and pedals. It was very annoying during a cross wind landing to have the bungies trying to bring the nose around with the deflected aileron. Like WacoFan I think they are a great value and also believe that well maintained fabric is preferable to metal.
 
Only experience I have is in a "converted" Tri-Pacer. The only thing I did not like was the bungy interlock thingy between the yoke and pedals. It was very annoying during a cross wind landing to have the bungies trying to bring the nose around with the deflected aileron. Like WacoFan I think they are a great value and also believe that well maintained fabric is preferable to metal.

108 Stinson or a Pacer - which would you choose for a family hauler? Both exceptional values - pick one.
 
I bought a Pacer earlier this year. It's a PA-22/20 which is the tri-pacer converted to a pacer. Wider gear than the original pacer so much more manageable as a tailwheel airplane, but still considerably more difficult than say, a citabria or super cub. I have the O-320 (160hp) in mine, and with that configuration I can put 4 people, a few bags, and full fuel and be legitimate. On the other side of the coin, my biggest complaint is that you would be VERY cramped like that. It can be difficult if you have anyone tall. I find 4 short people works, (i'm short so i can scoot my seat up all the way and then someone can semi-comfortably sit behind me.) If you have someone tall they almost need a side of the airplane to themselves, as they wont have enough legroom in the front or back seat with another person. I've had very few issues with it. The fuel burn is great, fabric can be troublesome but I keep mine hangared and wouldn't want one if it couldn't be. My spinner backing plate recently cracked and in turn cracked the spinner immediately. You can't repair spinners really so had to replace the parts. $500 for parts and spinner paint. I think it's a really great airplane. Flying characteristics are great, faster than a 172, but the thing just won't stall without effort. Still working on landings. Have yet to get anything consistently nice, I'm starting to think it's a lost cause haha. Enjoy it, great airplanes!
 
As a side note, Piper quit making the original pacer because they were having a fairly large amount of groundloop incidents with students and owners. The main gear was pretty close together for an airplane like that and made it very squirrely on the ground. The converted tri-pacers are close to 2 feet wider wheel base. Most short wing piper gurus i've talked to prefer the converted ones. I have flown an original and it is still a great airplane, but requires more attention on the pilot's part anytime you are moving on the ground.
 
Flew both. I currently own a Pacer and it's by far a better flyer than the station wagon. If your intentions are always flying with the family well then head the ways of the Stinson, otherwise nothing beats the flight of a Pacer. Great short and off field performance, Shortwing gives it great performance and in my opinion a solid plane all around.
 
Personally I'd pick the Stinson.

Thanks - why?

Stinson, but finding someone that knows how to work on the engine may be a challenge.

The Franklins can be a challenge. There are STC's for Lycomings. Franklins are really smooth in my opinion. Flown behind them in 108's as well as a Bellanca and I really like the engine a lot - but parts can be a bear I hear. Why the Stinson?


Thanks - why?

Flew both. I currently own a Pacer and it's by far a better flyer than the station wagon. If your intentions are always flying with the family well then head the ways of the Stinson, otherwise nothing beats the flight of a Pacer. Great short and off field performance, Shortwing gives it great performance and in my opinion a solid plane all around.

Thanks for the answer.

I really appreciate all of you weighing in - just asking why to get personal perspectives on why the Stinson/Pacer choice.
 
I've got a Stinson 108, and while I'm only a recent PPL (finished my training and did my checkride in my 108), here are some advantages over a Pacer/Tri-Pacer (some I know from experience, some I've "heard"

2 doors
Nearly impossible to overload or get out of CG (seriously)
nice visibility
easier ground handling than a Pacer
VERY forgiving oleo strut gear that soaks up those full stall landings from 2 feet off the runway (oops)
SMOOTH engine
Built like a brick *out*house
LOVES MOGAS
Looks better than a pacer, looks WAY better than a tri-pacer. Actually looks decent metalized, unlike the Pipers.

Disadvantages to a pacer are:
Stinson is little slower, IMO (at least mine is, but...wooden prop)
Stinson/Franklin uses more like 9 GPH than the 8gph for the Piper/0-320 for the same power
Stinson/Franklin HATES 100LL, if you have no chance of getting mogas (there's a station near my airport that has ethanol free, so it needent be at the airport) then I'd lean Piper


Some Franklin parts are hard to find or expensive, but some are cheaper than lycoming. Where you get into trouble is with things like cranks and exhaust valves. The 14mm plugs that franklins use are hideously expensive, but if you use mogas, they last a LONG time.
 
Back
Top