Why I don't trust helicopters

If you think flying them is bad try working on them.

I rebuilt the TR gearbox on one once and two flights later it found itself stranded in a field because it lost it's TR. I didn't sleep the entire night wondering what I had eff'd up. Come to find out the TR shaft had disengaged from the MR GB because someone didn't put a cotter pin in and it wasn't my doing.

Had someone been hurt or died I would have been more than just a little upset.
 
No way! The Israeli Air Force has a bunch of helicopters and they seem to be doing alright. ;)


i-see-what-you-did-there.jpg
 
So this was an aerobatics demo gone wrong. But it still conjures up thoughts of some pin breaking, and you're basically just riding it out till the crash. No thanks.
 
You blaspheming heretics. You will all burn in hell!

:)

I'll take LDmax over this any day.

And btw, that wasn't the helo fault there.........it's called pilot error. So you'd take L/D max over what....a moron pilot?

That I can agree with.
 
You blaspheming heretics. You will all burn in hell!

:)

Y'know, given your progress through a series of aircraft that have an increasingly strong aversion to flying naturally, how far away are we from you moving on to a rocket-powered ambulance gurney? :D
 
Y'know, given your progress through a series of aircraft that have an increasingly strong aversion to flying naturally, how far away are we from you moving on to a rocket-powered ambulance gurney? :D

That's a very good point.........:D
 
Why I don't trust helicopters: Jesus Bolts. Nothing I fly will ever have a bolt called the Jesus Bolt.

I guess other helo's could be different but I've always heard it called the j nut, or Jesus nut. Ours had a lot of bolts holding the j nut on but nit at a very high torque. Something like 20 ft/lbs
MikeD is it true it's just one bolt that holds on each engine on the A-10?
 
Tends to happen when you start a loop that low.
The thread title reminds me of a video I saw a couple weeks ago of a tail boom on some kind of Russian helicopter flat out falling off and the thing spinning out of control. Scary stuff.
 
This is why I don't trust cars. Give me an auto-rotation over this any day:

burning-suv.jpg
 
Wow... just watched the video. That was the stupidest helicopter piloting I've ever seen. I'm surprised he didn't biff it during the 90 degree bank 15ft above the ground.
 
:eek:
I guess other helo's could be different but I've always heard it called the j nut, or Jesus nut. Ours had a lot of bolts holding the j nut on but nit at a very high torque. Something like 20 ft/lbs
MikeD is it true it's just one bolt that holds on each engine on the A-10?

:eek: 20ftlbs is high torque. IIRC the diesel heads I used to install on a Cummins diesel were 180ftlbs. It's been a while and I could be wrong, but I do remember being tired after torquing down a head.
 
This is why I don't trust cars. Give me an auto-rotation over this any day:

burning-suv.jpg

:yeahthat:

I fail to see how this is any different than when Chrissy Clueless the generic non-aviator screams "those planes are dangerous" every time they see a turboprop because they heard about such and such accident.
 
Wow... just watched the video. That was the stupidest helicopter piloting I've ever seen. I'm surprised he didn't biff it during the 90 degree bank 15ft above the ground.

I was wondering if you were still around here. :)
 
Back
Top