Baronpilot244
Killick Stoker
Hi all,
I need some help and guidance here on a technical question.
During a prebuy a few discrepanicies were found in the logbooks.
It turns out that the airplane had some avionics installed when it had about 10 hours on the airframe.
The work was done by Raytheon in Dallas, Tx - this facility has closed down.
The 337 is in the log as well as a logbook entry, but no STCs for the installed equipment. What doesn't help is that the entry doesn't list the relevant STC number.
How does one get copies of the STCs in this case?
The specific STCs I need are:
AIM 305 Attitude Gyro
General Design 5550 Turn and Slip
Bose Interface Adapter kit
Argus 7000CE moving map display
David Clark 500 intercom
I've talked to some of the manufacturers and they haven't been much help.
I've also talked to Beechcraft and they don't seem to want to do much either.
Help!!!!
Bp244
I need some help and guidance here on a technical question.
During a prebuy a few discrepanicies were found in the logbooks.
It turns out that the airplane had some avionics installed when it had about 10 hours on the airframe.
The work was done by Raytheon in Dallas, Tx - this facility has closed down.
The 337 is in the log as well as a logbook entry, but no STCs for the installed equipment. What doesn't help is that the entry doesn't list the relevant STC number.
How does one get copies of the STCs in this case?
The specific STCs I need are:
AIM 305 Attitude Gyro
General Design 5550 Turn and Slip
Bose Interface Adapter kit
Argus 7000CE moving map display
David Clark 500 intercom
I've talked to some of the manufacturers and they haven't been much help.
I've also talked to Beechcraft and they don't seem to want to do much either.
Help!!!!
Bp244