TFaudree_ERAU
Mashin' dem buttons
We deadheaded the airplane home from maintenance yesterday. We had some work done to the pressurization system, so I flew right seat in order to run some tests under the direction of the former demo/test pilot that I was flying with. It was a great opportunity to learn the finer points of the system and will hopefully allow me to diagnose any sort of problems that we have in the future. The fact that this pilot knew the system so well helped us diagnose the problem on the way down and saved us the cost of about 5 hours of troubleshooting. That's called paying for yourself.
Anyway, there was a nasty front moving through VA, NC, SC, and GA. I snapped some pictures as we worked our way around them.
Enjoy
We got bumped around going around the last bit of weather near Manteo and the Outer Banks, but as we got near the VA/NC state line, we were greated with a beautiful sight.
The guy doing the flying is a former Air America pilot. Here he is showing me an "Air America" approach into ORF. Actually, Air America would have turned final over the numbers.
Not our airplane, but a Hawker nonetheless. Beautiful sunset with the overhang on the back side of the front.
Anyway, there was a nasty front moving through VA, NC, SC, and GA. I snapped some pictures as we worked our way around them.
Enjoy
We got bumped around going around the last bit of weather near Manteo and the Outer Banks, but as we got near the VA/NC state line, we were greated with a beautiful sight.
The guy doing the flying is a former Air America pilot. Here he is showing me an "Air America" approach into ORF. Actually, Air America would have turned final over the numbers.
Not our airplane, but a Hawker nonetheless. Beautiful sunset with the overhang on the back side of the front.